4. Repeat step 1 to check if the IP address has changed.
If the IP is successfully configured, the Managed PoE Switch will apply the new IP
address setting immediately. You can access the Web interface of the Managed PoE
Switch through the new IP address.
3.3 Storing Current Switch Configuration
In the Managed PoE Switch, the running configuration sequence running-config
can be saved from the RAM to FLASH by "copy" command, so that the running
configuration sequence becomes the start-up configuration file, which is called
configuration save.
At the "#" prompt, enter the following command and press <Enter>.
# copy running-config startup-config
Figure 3-6: Saving Current Configuration Command Screen
If you are not familiar with the console command or the related
parameter, enter "help" anytime in console to get the help
description.
Note
8