Install Stornext Licenses - Quantum StorNext G300 R510 Hardware Manual

Install StorNext
Licenses
StorNext G300 Gateway Appliance Hardware Guide
1 Open an SSH connection to the system using IP address 10.17.21.1
on either the Metadata or LAN Client network.
Note: Use the IP address assigned if different from the default
used here.
2 Enter
stornext
3 Enter the password for the
4 At the command prompt enter the following to gain root user
access:
sudo rootsh
5 Enter the password for the stornext user account again when
prompted.
6 Press Enter.
7 Launch the Service Menu script by typing:
sh /opt/DXi/scripts/service.sh
The Service Menu displays.
In order to install license files on the G300:
1 When you receive the new
the file to a USB thumb drive or CD or DVD.
2 Insert the USB thumb drive, CD or DVD with the license.dat file into
the USB slot or DVD drive on the G300. If you have not yet
established an SSH session to the G300, do so at this time, using
steps in the previous sections.
3 Stop StorNext services:
Chapter 3: Basic System Operations
Obtain and Install StorNext Licenses
for the username at the prompt.
stornext
license.dat
user account.
file from Quantum, copy
37