1. Manuals
  2. Brands
  3. Quantum Manuals
  4. Gateway
  5. LightSpeed Appliance QLS250
  6. Getting started manual

Quantum QLS250 Getting Started Manual

Hide thumbs Also See for QLS250:
Table of Contents

Advertisement

Quick Links

Download this manual
07 June 2023
LIGHTSPEED
APPLIANCES
QLS250, QLS450, QLS650, QLS800, MLS200, MLS400
Getting Started Guide

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the QLS250 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Quantum QLS250

Summary of Contents for Quantum QLS250

  • Page 1 07 June 2023 LIGHTSPEED APPLIANCES QLS250, QLS450, QLS650, QLS800, MLS200, MLS400 Getting Started Guide...
  • Page 2 Check Point Copyright Notice © 2023 Check Point Software Technologies Ltd. All rights reserved. This product and related documentation are protected by copyright and distributed under licensing restricting their use, copying, distribution, and decompilation. No part of this product or related documentation may be reproduced in any form or by any means without prior written authorization of Check Point.
  • Page 3 Important Information Important Information Latest Software We recommend that you install the most recent software release to stay up-to-date with the latest functional improvements, stability fixes, security enhancements and protection against new and evolving attacks. Certifications For third party independent certification of Check Point products, see the Check Point Certifications page.
  • Page 4 Important Information Revision History Date Description 07 June 2023 Updated for MLS200 and MLS400 LightSpeed Appliances Changed the line card name from "NVIDIA ConnectX 100G (QSFP28)" to "2-Port Dual- Width 10/25/40/100G" 22 May 2022 Updated French and German Safety, Environmental, and Electronic Emissions Notices translations 21 February Rebranding - New Check Point logo...

  • Page 5: Table Of Contents

    LightSpeed Appliances Hardware Front Panel Front Panel System LEDs Rear Panel Cooling Fan Units Naming Convention Using the Power Cable Restraint on QLS250, QLS450, QLS650, QLS800, and MLS400 Appliances PSU Configuration and Monitoring Lights Out Management Dual Redundant BIOS Replacing and Upgrading Components...
  • Page 6 Table of Contents Gaia OS Port Assignments Restoring Factory Defaults Restoring from the Gaia Portal Restoring from the Boot Menu Restoring from Gaia Clish Registration and Support Support Where To From Here? LightSpeed Appliances Getting Started Guide      |      6...

  • Page 7: Safety, Environmental, And Electronic Emissions Notices

    Safety, Environmental, and Electronic Emissions Notices Safety, Environmental, and Electronic Emissions Notices Read the following warnings before setting up or using the appliance. Warning - Do not block air vents. A minimum 1/2-inch clearance is required. Warning - Many components described in this document can be damaged by Electrostatic Discharge (ESD).
  • Page 8 Safety, Environmental, and Electronic Emissions Notices Lithium Battery Caution There is a risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries according to the manufacturer's instructions. Installation only by a skilled person who knows all Installation and Device Specifications which are to be applied.
  • Page 9 Safety, Environmental, and Electronic Emissions Notices Rack Mount Instructions The following or similar rack-mount instructions are included with the installation instructions: 1. Elevated Operating Ambient - If installed in a closed or multi-unit rack assembly, the operating ambient temperature of the rack environment may be greater than room ambient. Therefore, consideration should be given to installing the equipment in an environment compatible with the maximum ambient temperature specified by the manufacturer.
  • Page 10 Safety, Environmental, and Electronic Emissions Notices Information to user: The user's manual or instruction manual for an intentional or unintentional radiator shall caution the user that changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
  • Page 11 Safety, Environmental, and Electronic Emissions Notices Product Disposal This symbol on the product or on its packaging indicates that this product must not be disposed of with your other household waste. Instead, it is your responsibility to dispose of your waste equipment by handing it over to a designated collection point for the recycling of waste electrical and electronic equipment.

  • Page 12: Sicherheits-, Umwelt- Und Emv-Hinweise

    Sicherheits-, Umwelt- und EMV-Hinweise Sicherheits-, Umwelt- und EMV- Hinweise Lesen Sie die folgenden Warnhinweise durch, bevor Sie das Gerät einrichten oder verwenden. Achtung - Halten Sie die Belüftungsöffnungen frei. Es ist ein Mindestabstand von 1,3 cm einzuhalten. Achtung - Viele in diesem Dokument beschriebene Komponenten können durch elektrostatische Entladung (ESD) beschädigt werden.
  • Page 13 Sicherheits-, Umwelt- und EMV-Hinweise Um Beschädigungen der Systemplatine zu vermeiden, müssen Sie diese mit Vorsicht behandeln. Die folgenden Maßnahmen sind im Allgemeinen ausreichend, um Ihre Geräte vor statischen Entladungen zu schützen: Dieses Gerät muss geerdet werden. Tragen Sie beim Umgang mit der Platine eine Erdungsmanschette, die zum Neutralisieren statischer Ladungen ausgelegt wurde.
  • Page 14 Sicherheits-, Umwelt- und EMV-Hinweise Sicherheitshinweise Lithiumbatterien Es besteht Explosionsgefahr, wenn die Batterie durch einen falschen Typ ersetzt wird. GEBRAUCHTE BATTERIEN SIND DEN HERSTELLERANWEISUNGEN ENTSPRECHEND ZU ENTSORGEN. Installation nur durch eine fachkundige Person, die alle einzuhaltenden Installations- und Gerätespezifikationen kennt. Tragen Sie das Gerät nicht am Griff der Stromversorgung, wenn Sie es an einen anderen Ort bringen. Bitte beachten Sie die örtlichen Gesetze und Vorschriften zur sicheren Entsorgung von Lithiumbatterien.
  • Page 15 Sicherheits-, Umwelt- und EMV-Hinweise Anweisungen zur Rackmontage Die folgenden oder ähnliche Anweisungen zur Rackmontage sind in den Installationsanweisungen enthalten: 1. Erhöhte Betriebstemperatur - Bei Installation in einer geschlossenen oder Mehrfachgeräte-Rack- Baugruppe kann die Betriebsumgebungstemperatur der Rackumgebung höher als die Raumtemperatur sein. Deshalb sollte darauf geachtet werden, das Gerät in einer Umgebung zu installieren, die kompatibel zu der vom Hersteller angegebenen maximalen Umgebungstemperatur ist.
  • Page 16 Sicherheits-, Umwelt- und EMV-Hinweise Vorsicht! Der Hersteller übernimmt keine Verantwortung für Radio- oder Fernsehsignalstörungen, die durch nicht genehmigte Modifikationen des Geräts auftreten. Derartige Modifikationen könnten zum Erlöschen der Betriebserlaubnis des Benutzers führen. Informationen für den Benutzer: Das Betriebshandbuch oder die Bedienungsanleitung eines Geräts mit beabsichtigter oder nicht beabsichtigter Strahlungsquelle muss einen Warnhinweis für den Benutzer enthalten, dass Änderungen oder Modifikationen, die nicht ausdrücklich von der für die Normenkonformität zuständigen Partei gestattet werden, möglicherweise zum Erlöschen der Betriebserlaubnis des Benutzers führen.
  • Page 17 Sicherheits-, Umwelt- und EMV-Hinweise VCCI-Konformitätserklärung Dieser Absatz umfasst die Konformitätserklärung für den Voluntary Control Council for Interference by Information Technology Equipment (VCCI), der die Funkwellenemissionen in Japan regelt. Produktentsorgung Dieses Symbol auf dem Produkt oder dessen Verpackung gibt an, dass dieses Produkt nicht zusammen mit dem Hausmüll entsorgt werden darf.

  • Page 18: Remarques Relatives À La Sécurité, L'environnement Et Les Émissions Électroniques

    Remarques relatives à la sécurité, l'environnement et les émissions électroniques Remarques relatives à la sécurité, l'environnement et les émissions électroniques Avant de mettre en place ou d'utiliser l'appareil, veuillez lire les avertissements suivants. Avertissement - ne pas obturer les aérations. Il faut laisser au moins 1,27 cm d'espace libre. Avertissement - Un grand nombre des composants décrits dans ce document peuvent être endommagés par Décharge Électrostatique (ESD).
  • Page 19 Remarques relatives à la sécurité, l'environnement et les émissions électroniques Pour éviter d'endommager les cartes système, il est important de les manipuler avec soin. Les mesures suivantes sont généralement suffisantes pour protéger votre équipement contre les décharges d'électricité statique : Cet équipement doit être mis à la terre. Avant de manipuler la carte, portez aux poignet un bracelet antistatique relié...
  • Page 20 Remarques relatives à la sécurité, l'environnement et les émissions électroniques Instructions de sécurité électrique Avant d'allumer l'appareil, effectuez la mise à la terre avec le câble de terre. Une mise à la terre correcte est très importante pour protéger l'équipement contre tout bruit externe néfaste et pour réduire le risque d'électrocution en cas de foudre.
  • Page 21 Remarques relatives à la sécurité, l'environnement et les émissions électroniques Pour la Californie : Matériau perchloraté : manipulation spéciale potentiellement requise. Voir http://www.dtsc.ca.gov/hazardouswaste/perchlorate L'avis suivant est fourni conformément au California Code of Regulations, titre 22, division 4.5, chapitre 33. Meilleures pratiques de manipulation des matériaux perchloratés. Ce produit, cette pièce ou les deux peuvent contenir une pile au dioxyde de lithium manganèse, qui contient une substance perchloratée.
  • Page 22 Remarques relatives à la sécurité, l'environnement et les émissions électroniques Déclaration de la Federal Communications Commission (FCC) pour un appareil ou périphérique numérique de classe A Cet équipement a été testé et déclaré conforme aux limites pour appareils numériques de classe A, selon la section 15 des règlements de la FCC.
  • Page 23 Remarques relatives à la sécurité, l'environnement et les émissions électroniques Mise au rebut du produit Ce symbole apposé sur le produit ou son emballage signifie que le produit ne doit pas être mis au rebut avec les autres déchets ménagers. Il est de votre responsabilité de le porter à un centre de collecte désigné pour le recyclage des équipements électriques et électroniques.

  • Page 24: Declaration Of Conformity Qls250

    Declaration of Conformity QLS250 Declaration of Conformity QLS250 Name and address of the authorized trademark: Check Point Software Technologies Ltd. 5 Shlomo Kaplan Street, Tel Aviv 6789159, Israel. Brand name: Check Point Marketing models: QLS250 Regulated models: QL-20 Manufacturer's name: Check Point Software Technologies Ltd.
  • Page 25 Declaration of Conformity QLS250 Category Technical Specification Description Safety IEC 60950-1:2005/AMD1:2009, IEC Information technology equipment. Electrical 60950-1:2005/AMD2:2013, Safety requirements, LVD EN 60950-1:2006 /A11:2009 /A1:2010 /A12:2011/ A2:2013. UL/ULc 62368-1 IEC 62368-1:2014 EN 62368-1:2014/A11:2017. RoHS EN 50581:2012 Restriction of Hazardous Substances WEEE...
  • Page 26 Declaration of Conformity QLS250 BSMI Taiwan Declaration of Restricted Substances LightSpeed Appliances Getting Started Guide      |      26...
  • Page 27 Declaration of Conformity QLS250 Description QL-20 LightSpeed Appliances Getting Started Guide      |      27...

  • Page 28: Declaration Of Conformity Qls450, Qls650, And Qls800

    Declaration of Conformity QLS450, QLS650, and QLS800 Declaration of Conformity QLS450, QLS650, and QLS800 Name and address of the authorized trademark: Check Point Software Technologies Ltd. 5 Shlomo Kaplan Street, Tel Aviv 6789159, Israel. Brand name: Check Point Marketing models: QLS450, QLS650, QLS800 Regulated models: QD-10, QD-15...
  • Page 29 Declaration of Conformity QLS450, QLS650, and QLS800 Category Technical Specification Description EMC /EMI Electromagnetic Compatibility, EN 55032:2015+AC: 2016 Class A Emissions requirements for information technology equipment EN 61000-3-2: 2014 Class A Immunity characteristics. Limits and methods EN 61000-3-3: 2013 of measurement EN 55024: 2010 +A1: 2015 EN 61000-4-2: 2009 EN 61000-4-3: 2006 +A1: 2008 +A2:...
  • Page 30 Declaration of Conformity QLS450, QLS650, and QLS800 BSMI Taiwan Declaration of Restricted Substances LightSpeed Appliances Getting Started Guide      |      30...
  • Page 31 Declaration of Conformity QLS450, QLS650, and QLS800 Description QD-10, QD-15 LightSpeed Appliances Getting Started Guide      |      31...

  • Page 32: Declaration Of Conformity Mls200

    Declaration of Conformity MLS200 Declaration of Conformity MLS200 Name and address of the authorized trademark: Check Point Software Technologies Ltd. 5 Shlomo Kaplan Street, Tel Aviv 6789159, Israel. Brand name: Check Point Marketing models: MLS200 Regulated models: QM-35 Manufacturer's name: Check Point Software Technologies Ltd.
  • Page 33 Declaration of Conformity MLS200 Category Technical Specification Description Information Technology Equipment - Radio EN 55032: 2012/AC: 2013 Class A Disturbance Characteristics CISPR 32:2012 EN 55024 EN 61000-3-2: 2014 Information Technology Equipment - Harmonics Characteristics EN 61000-3-3: 2013 Information Technology Equipment - Harmonics Characteristics EN 55024: 2010+A1:2015 Immunity characteristics - Limits and methods...
  • Page 34 Declaration of Conformity MLS200 Category Technical Specification Description Safety UL GS / IEC 60950-1: 2005 (Second Information technology equipment. Edition)+Am 1:2009+Am 2: 2013 Safety General requirements, CE LVD EN 62368-1 : 2014 UL/ULc 60950-1 Information technology equipment UL 62368-1 Safety General requirements Date and Place of issue: January, 2020, Tel Aviv, Israel - QM-35 European Union (EU) Electromagnetic and Safety Compatibility Directive This product is herewith confirmed to comply with the requirements set out in the Council Directive on the...
  • Page 35 Declaration of Conformity MLS200 GS Safety Notice Protective earthing is Ensure connection of the power cord to a socket-outlet with earthing connection, used as a safeguard or equivalent Restrict Access Area It is recommended that equipment be installed only in a server room or computer Instruction room where access is: Restricted to qualified service personnel or users familiar with restrictions...
  • Page 36 Declaration of Conformity MLS200 LightSpeed Appliances Getting Started Guide      |      36...

  • Page 37: Declaration Of Conformity Mls400

    Declaration of Conformity MLS400 Declaration of Conformity MLS400 Name and address of the authorized trademark: Check Point Software Technologies Ltd. 5 Shlomo Kaplan Street, Tel Aviv 6789159, Israel. Brand name: Check Point Marketing models: MLS400 Regulated models: QP-25 Manufacturer's name: Check Point Software Technologies Ltd.
  • Page 38 Declaration of Conformity MLS400 Category Technical Specification Description Safety IEC 60950-1:2005/AMD1:2009, IEC Information technology equipment. 60950-1:2005/AMD2:2013, Electrical Safety requirements, LVD EN 60950-1:2006 /A11:2009 /A1:2010 /A12:2011/ A2:2013. UL/ULc 62368-1 IEC 62368-1:2014 EN 62368-1:2014/A11:2017. RoHS EN 50581:2012 Restriction of Hazardous Substances WEEE Directive 2012/19/EU Waste Electrical and Electronic Equipment Date and Place of issue: QP-25 November 2021, Tel Aviv, Israel...

  • Page 39: Introduction

    Introduction Welcome Congratulations on your new Quantum LightSpeed Appliance. We hope that you will be satisfied with this Security Gateway and our support services. Check Point products provide your business with the most up to date and secure solutions available today.

  • Page 40: Shipping Carton Contents

    Rack mounting screws Ear bracket kit and screws Documentation Quick Start Guide Installing the R81.10 Jumbo Hotfix Accumulator on Quantum LightSpeed Appliances Installing the Telescopic Rails Guide Software License Agreement (EULA) Image Management Guide (only applicable if the software image contains more than one release) LightSpeed Appliances Getting Started Guide      |      40...

  • Page 41: Terminology

    Rack mounting screws Ear bracket kit and screws Documentation Quick Start Guide Installing the R81.10 Jumbo Hotfix Accumulator on Quantum LightSpeed Appliances Installing the Telescopic Rails Guide Software License Agreement (EULA) Image Management Guide (only applicable if the software image contains...

  • Page 42: Configuring Appliances

    Configuring Appliances Configuring Appliances Connecting to the Appliance CLI You can configure advanced options in Gaia from the Gaia Portal or through Gaia Clish. To connect to the command line interface of the appliance, use one of these: An SSH connection to the management interface. A serial console cable and terminal emulation software, such as PuTTY (from Windows) or Minicom (from Unix/Linux).

  • Page 43: Configuring The Security Gateway Object In Smartconsole

    Configuring Appliances Configuring the Security Gateway Object in SmartConsole See the Installation and Upgrade Guide for your version > Chapter Installing a Security Gateway, VSX Gateway . Configure a Security Gateway object on the Management Server: 1. Connect with SmartConsole to the Management Server. 2.
  • Page 44 3. Run this command to monitor the RAID status of the storage devices: raid_diagnostic This command shows data about the RAID and storage devices, with the percent of synchronization complete: Model DiskID:0 DiskID:1 QLS250, Left storage device Right storage device QLS450, QLS650, QLS800 MLS200...
  • Page 45 Configuring Appliances To monitor the RAID status of the storage devices from SmartConsole 1. From Gateways & Servers, select the object that represents the appliance. 2. In the Summary tab, click Device Information. Example: 3. Click RAID Volumes. The window shows volume and disk information. Example: To monitor the RAID status of the storage devices using SNMP Configure SNMP traps to send information about the RAID.
  • Page 46 Configuring Appliances Gaia Administration Guide for your version > Chapter System For more information, see the Management > Section SNMP . To hot-swap a storage device Important - Make sure that there is at least one fully synchronized storage device in the system. 1.

  • Page 47: Mounting The Appliances In A Rack

    Height Operating Model Specifications Temperature from 100V 17.40 in 24.01 in (13.8A) 3.46 in 32°F - 104°F QLS250 QL-20 (44.2 (61.0 0°C - 40°C to 240V (8.5A), (8.8 cm) 47 - 63Hz from 100V 17.40 in 24.01 in 5.19 in (10A) 32°F - 104°F...

  • Page 48: Appliance Air Vents

    Mounting the Appliances in a Rack Appliance Air Vents Make sure that the appliance air vents have sufficient airflow from front to rear when the appliance is mounted in a rack. Important - If the appliance vents are blocked, the appliance can become too hot and it can be damaged.

  • Page 49: Lightspeed Appliances Hardware

    LightSpeed Appliances Hardware LightSpeed Appliances Hardware This chapter contains information about the appliance hardware on the Front Panel and the Rear Panel. Front Panel Note - The diagrams below show the default installed hardware. QLS250 QLS450 LightSpeed Appliances Getting Started Guide      |      49...
  • Page 50 LightSpeed Appliances Hardware QLS650 QLS800 Legend for QLS250, QLS450, QLS650, and QLS800 Item Component Description Service tag A slide out card that identifies the appliance and shows its serial number and MAC address. Locator button Turns the location beacon LED on and off in the appliance.
  • Page 51 LightSpeed Appliances Hardware Item Component Description USB Type-C port For a serial connection to the appliance. 1 x RJ45 Console RJ45 port for a serial connection to the appliance. port The USB 3.0 ports are backwards compatible to USB 2.0. 2 x USB 3.0 ports LOM port LOM (Lights Out Management) port to connect to the LOM Card.
  • Page 52 LightSpeed Appliances Hardware Legend for MLS200 Item Component Description Expansion line "Gaia OS Port Assignments" on page 68 card For more information, see the LightSpeed 10/25/40/100G QSFP28 Ports Administration Guide On board LAN Eight 10/100/1000Base-T RJ-45 ports. ports These expansion slots are assigned eth1-eth8 in the Gaia OS. Appliance ports "Front Panel Appliance Ports on MLS200"...
  • Page 53 LightSpeed Appliances Hardware Front Panel Appliance Ports on MLS200 Legend Item Component Description Synchronization For synchronization with peer cluster members in ClusterXL port configuration. RJ45 console port For a serial connection to the appliance. See "Connecting to the Appliance CLI" on page 42 Port activity LED Off - No activity Slow Blink (Green) - Activity...
  • Page 54 LightSpeed Appliances Hardware MLS400 Legend for MLS400 Item Component Description Service tag A slide out card that identifies the appliance and shows its serial number and MAC address. Locator button Turns the location beacon LED on and off in the appliance. System LEDs "Front Panel System LEDs"...

  • Page 55: Front Panel System Leds

    Front Panel System LEDs Front Panel System LEDs Legend Item Icon Component Description System power Off - System power off On (Green) - System power on Storage device Off - No storage device activity activity On (Amber) - Read/write activity Power supply Off - No power/no status status...

  • Page 56: Rear Panel

    Rear Panel Rear Panel QLS250 QLS450, QLS650, and QLS800 LightSpeed Appliances Getting Started Guide      |      56...
  • Page 57 Rear Panel MLS200 MLS400 Legend for QLS250, QLS450, QLS650, QLS800, MLS200, and MLS400 Item Component Description Cover screws Loosen the screws to remove the appliance cover. When servicing the appliance, connect an ESD strap to this point. grounding point Alarm Off...
  • Page 58 Cooling fan In QLS250 appliances - Units are numbered from right to left: 1, 2, 3, 4. units In QLS450, QLS650, and QLS800 appliances -Units are numbered in stacks of two (one inner and one outer) for a total of 8 fans. When checking the hardware sensors in the CLI, they are referred to as 1-4 "Cooling Fan Units Naming Convention"...

  • Page 59: Cooling Fan Units Naming Convention

    Using the Power Cable Restraint on QLS250, QLS450, QLS650, QLS800, and MLS400 Appliances You can use the power cable restraint to prevent accidental removal of the power cable. Power Cable Restraint on QLS250, QLS450, QLS650, QLS800, and MLS400 Appliances LightSpeed Appliances Getting Started Guide      |      59...
  • Page 60 Description Restraint anchor Cable loop Restraint strip tab Restraint strip QLS250 and MLS400 The image below is for the QLS250 appliance, but installing the power cable restraint is the same for the MLS400 appliance. Legend Item Description Restraint strip slot...
  • Page 61 Rear Panel To install the power cable restraint on QLS250, QLS450, QLS650, QLS800, and MLS400 1. If a power cable is connected to the power supply inlet, disconnect it. 2. Find the restraint strip slot on top of the power supply inlet.
  • Page 62 Rear Panel 3. Push down on the restraint clip to close it and secure the power supply cable. Legend Item Description Restraint clip in the open position (upward) Restraint clip in the closed position LightSpeed Appliances Getting Started Guide      |      62...

  • Page 63: Psu Configuration And Monitoring

    PSU Configuration and Monitoring PSU Configuration and Monitoring These are the supported PSU configurations for the appliance models and PSU types: PSU Type QLS250 QLS450, QLS650, and QLS800 MLS200 and MLS400 AC or DC 2 PSUs 3 PSUs 2 PSUs Important - All PSUs on an appliance must be of the same type, either all AC or all DC.
  • Page 64 PSU Configuration and Monitoring Column Description Status - No problems found. - Error. The maximum threshold. Maximum For PSUs, it is only measured as and Down. The minimum threshold. Minimum For PSUs, it is only measured as and Down. LightSpeed Appliances Getting Started Guide      |      64...

  • Page 65: Lights Out Management

    Lights Out Management Lights Out Management The Check Point Lights Out Management (LOM) card lets you use a dedicated management channel to remotely control Check Point appliances. Lights Out Management can also work when the appliance is turned off or does not respond. However, the appliance must be connected to a power source.

  • Page 66: Dual Redundant Bios

    Dual Redundant BIOS Dual Redundant BIOS To ensure resilience in the event of a BIOS failure, appliances are equipped with dual redundant BIOS images. If an appliance encounters a BIOS failure, it boots up from a recovery, read-only BIOS image that enables full functionality of the appliance.

  • Page 67: Replacing And Upgrading Components

    Replacing and Upgrading Components Replacing and Upgrading Components The appliances have easily replaceable parts to minimize downtime. There are also components that you can install to upgrade the appliance. Parts and components that can be used with the appliance: Telescopic rails Line cards (excluding MLS200 and MLS400) Transceivers AC and DC power supply units...
  • Page 68 Important - In the Maestro configuration, only the 2-Port Dual-Width 10/25/40/100G QSFP28 ports are supported for connecting the Security Appliances to Maestro Orchestrators. QLS250 Left 2-Port Dual-Width 10/25/40/100G QSFP28 Card - eth1-01 and eth1-02 Middle expansion line card - eth3-01 to eth3-04...
  • Page 69 Gaia OS Port Assignments QLS650 Top row - left 2-Port Dual-Width 10/25/40/100G QSFP28 Card - eth1-01, eth1-02 Top row - right 2-Port Dual-Width 10/25/40/100G QSFP28 Card - eth3-01, eth3-02 Bottom row - left 2-Port Dual-Width 10/25/40/100G QSFP28 Card - eth5-01, eth5-02 Bottom row - right expansion line cards - eth7-01 to eth7-04 and eth8-01 to eth8-04 QLS800 Top row - left 2-Port Dual-Width 10/25/40/100G QSFP28 Card - eth1-01, eth1-02...
  • Page 70 Gaia OS Port Assignments MLS400 From left to right - eth1, eth2, eth3 and eth4 LightSpeed Appliances Getting Started Guide      |      70...

  • Page 71: Restoring Factory Defaults

    Restoring Factory Defaults Restoring Factory Defaults If necessary, restore the appliance to its factory default settings. Important - If you restore factory defaults, all information on the appliance is deleted. Restoring from the Gaia Portal Use the Gaia Portal to restore the appliance to the factory default settings. To restore a Gaia appliance from the Gaia Portal: 1.

  • Page 72: Restoring From The Boot Menu

    Restoring Factory Defaults Restoring from the Boot Menu To restore the appliance from the Boot Menu: 1. Connect the supplied serial cable's RJ45 or USB type-C connector to the console port on the front of the appliance. 2. From the computer, open a terminal emulation program such as PuTTY or Microsoft HyperTerminal. 3.

  • Page 73: Registration And Support

    Registration and Support Registration and Support Support For additional technical information about Check Point products, consult the Check Point Support Center Where To From Here? You have the basics to get started. The next step is to get more advanced knowledge of your Check Point software.

This manual is also suitable for:

Qls450Qls650Qls800Mls200Mls400

Table of Contents