Table of Contents
Advertisement
Chapter 3: Basic System Operations
Shutting Down the G300
Figure 12 Turning On
SystemPower
Shutting Down the G300
30
2 On each LAN client, mount the file systems on clients.
3 Restart I/O access to all LAN clients.
Prerequisites
Before shutting down the system:
1 Halt I/O access to all LAN clients.
2 On each LAN client, unmount the file systems on the clients to avoid
stale mount point messages.
Note:
Step 2
is only required when a single G300 is powered off and
it is the only G300 in use in the StorNext network. Powering off
a single gateway when two or more G300s are in use in the
StorNext network allows uninterrupted client access to File
Systems due to system redundancy, and does not require client
file systems to be unmounted.
StorNext G300 Gateway Appliance Hardware Guide
Advertisement
Table of Contents
