Access The Service Menu Via The Service Port - Quantum StorNext G300 R510 Hardware Manual

Gateway appliance
Table of Contents

Advertisement

Chapter 3: Basic System Operations
Obtain and Install StorNext Licenses
Access the Service
Menu via the Service
Port
36
• Subnet mask - 255.255.255.0
5 Click OK.
6 Click Close.
7 Wait at least two minutes for the laptop to enable the network
connection.
About the Service Port
The system contains an integrated 1GbE Ethernet port that is dedicated
for Service access, called the Service Port. The Service Port on the system
is configured with unique a factory-set IP address. The default IP address
is (Use the IP address assigned within the MDC or LAN Client network if
different from the default used here):
10.17.21.1
Use the integrated 1GbE Service Port (eth0) to directly access the
command line and Service Menu functions directly.
Access the Service Menu
To access the Service Menu:
StorNext G300 Gateway Appliance Hardware Guide

Advertisement

Table of Contents
loading

This manual is also suitable for:

Stornext g301Stornext g302

Table of Contents