Table of Contents
Advertisement
en Installation and connection
Drinking water connection
Connect your appliance to a drinking
water connection.
Installing the drinking water
connection
Note
¡ If you are replacing the appliance,
you must use a new water supply
hose.
Consult the installation instructions
1.
supplied for the steps required
here.
Connect the appliance to the drink-
2.
ing water connection using the en-
closed parts.
Observe the "Technical data"
→ Page 63.
When doing so, check that the
3.
drinking water connection is not
kinked, crushed or twisted.
Electrical connection
Connecting the appliance to the
electricity supply
Notes
¡ Please follow the "Safety instruc-
tions" → Page 4.
¡ Connect the appliance to alternat-
ing current only, in the range of
220 - 240 V and 50 Hz or 60 Hz.
¡ Please note that the water safety
system is only functional if there is
a power supply.
Insert the non-heating appliance
1.
plug of the power cable into the
appliance.
Insert the mains plug of the appli-
2.
ance into a nearby socket.
The connection data for the appli-
ance can be found on the rating
plate.
Check that the mains plug is inser-
3.
ted properly.
14
Advertisement
Table of Contents
