SolidRF TRUE5-A Manual page 4

Step3: Introduce cables into room
Attention: Don't excessive bending
of the cable, otherwise it will be
damaged and loss functions. damaged and loss functions
Step4: Setup booster
1. Connect cable to outside
connecter make s re pin of the connecter, make sure pin of the
cable head smooth import
connecter's socket, and then
screw well till the end;
2. Plug in power cord;
Step5: Power on and evaluate effects
1. Power on booster;
2. Observe the flashing status of
"ALARM" lights;
3. If the lights lit 1 second and then
goes out, that means all the test
installation is correct;
4. Now check your cell phone to see
how about the signal strength
improved; improved;
5. If light is blinking, please read the
trouble shooting part of this
manual;
2
1