Test Installation - SolidRF TRUE5-A Manual

Test Installation
We STRONGLY recommends doing a soft install before the formal installation.
Doing a test installation of a cell phone booster allows to get best optimal
system setup.
Step1: Find the strongest signal, setup outdoor antenna with cable screwed
Affected by terrain and signal propagation characteristics. More higher of
the outdoor antenna will get better signal. Find the best signal around
the house by checking the bars of the cell phone. Setup the outdoor
antenna on the top of building and connect the cable.
Find a cell tower nearby!
There are a bunch of resource online, here are
some third party websites and app
recommended.
SolidRF does NOT guarantee the accuracy or
completeness on Third Party content
For Canada
website: www.cellmapper.net
app: TowerLocator(iPhone or Android)
For U.S.
websites:
www.cellmapper.net
www.cellreception.com/towers
www.antennasearch.com
Step2: Find a suitable place inside home for booster nearby the power socket
Minimum Required Separation Distance
Between Indoor And Outdoor Antenna：
6 meters (20 ft ) horizontal distance 6 meters (20 ft ) horizontal distance
4 meters (13 ft ) vertical distance(As far as
possible)