Table of Contents
Advertisement
www.ti.com
8 Device Description
8.1 Overview
The BQ76952 device is a highly integrated, accurate battery monitor and protector for 3-series to 16-series
Li-ion, Li-polymer, and LiFePO
provides data for host-based algorithms and control. A feature-rich and highly configurable protection subsystem
provides a wide set of protections that can be triggered and recovered completely autonomously by the device
or under full control of a host processor. The integrated charge pump with high-side protection NFET drivers
enables host communication with the device even when FETs are off by preserving the ground connection to the
pack. Dual programmable LDOs are included for external system use, with each independently programmable to
voltages of 1.8 V, 2.5 V, 3.0 V, 3.3 V, and 5.0 V, capable of providing up to 45 mA each.
The BQ76952 device includes one-time-programmable (OTP) memory for customers to set up device operation
on their own production line. Multiple communications interfaces are supported, including 400-kHz I
HDQ one-wire standards. Multiple digital control and status data are available through several multifunction pins
on the device, including an interrupt to the host processor, and independent controls for host override of each
high-side protection NFET. Three dedicated pins enable temperature measurements using external thermistors,
and multifunction pins can be programmed to use for additional thermistors, supporting a total of up to nine
thermistors, in addition to an internal die temperature measurement.
Copyright © 2021 Texas Instruments Incorporated
battery packs. A high-accuracy voltage, current, and temperature measurement
4
Product Folder Links:
SLUSE13A – JANUARY 2020 – REVISED MAY 2021
BQ76952
BQ76952
2
C, SPI, and
Submit Document Feedback
33
Advertisement
Table of Contents
