The Output Connector Function; Pin Layout Of In/Out Interface Connector - SAES SIP POWER User Manual

8. THE OUTPUT CONNECTOR FUNCTION

The output connectors can be used for a possible connection of a device designed for monitoring
or controlling the supply activity.
The IN/OUT INTERFACE is intended for connection to protective hardware systems;
the LAN connector can be utilized for communication purposes via ETHERNET interface
the USB connector can be utilized to record the device parameters on a USB flash memory
the RS485 connector (in the version without display) can be utilized for communication purposes
via RS485 interface in MODBUS protocol.
8.1.

Pin layout of IN/OUT Interface connector

Pin Meaning
1 GND
2
3 SW3+
4 SW2+
5 IP active +
6 IN +
M.HIST.0109.23 Rev.1
output of negative feeding voltage
not used
positive terminal of comparator switch 3
positive terminal of comparator switch 2
positive terminal of switch Operation IP on
positive terminal of control input INTERLOCK
USER MANUAL - SIP POWER ION PUMP CONTROLLER
Page 27 of 62