Table of Contents
Advertisement
Chapter 7 – Maintenance
Reason RT412
Optical Transceiver
Chapter 5: Maintenance
1
Power Indicator Off
2
Act Indicator Off
3
Cleaning Instructions
4
Equipment Return
RT412
This chapter describes the information to consider for an eventual maintenance.
For any further assistance required please contact the information and call center as
follows:
GE Grid Solutions:
Worldwide Contact Center
Web: www.GEGridSolutions.com/contact
Phone: +44 (0) 1785 250 070
•
Make sure the power supply terminal is connected properly;
•
Check if there is voltage at the terminals.
•
Check if the time input terminal is connected properly;
•
Make sure there is proper time reference in the terminals;
•
Make sure the cable is in good conditions, in accordance with the technical
specifications required.
Before cleaning the equipment, make sure that the primary voltage is removed. If it is
necessary cleaning the exterior of the equipment, use only a dry cloth. Internally it is
not required any cleaning.
All parts and components comprising Reason devices must be repaired exclusively by GE
Grid Solutions. In case of equipment malfunction the customer must get in contact with
GE's Contact Centre and never attempt to repair the device by his own.
To request equipment repair service, call GE Grid Solutions to check out shipment
options and receive the technical assistance order code.
The equipment must be packed in its original package or a suitable package to protect
against impacts and moisture.
Send equipment to address supplied including the sender's identification and the
technical assistance reference.
RT412
27
Advertisement
Table of Contents
