GE Reason RT412 Technical Manual page 10

RT412
10
Compliance with the European Commission Directive on EMC and LVD is demonstrated
using a Technical File.
•
EMC Compliance: Compliance with IEC 60255-26:2013 was used to establish
conformity.
•
Product Safety: Compliance with IEC 61010-1:2010 was used to establish
conformity.
•
Protective Class: Protective Class I. This equipment requires a protective
conductor (ground) to ensure user safety.
•
Installation category: Compliance with IEC 61010-1:2010 Overvoltage Category II
•
Environment: IEC 60068-2-1, IEC 60068-2-2, IEC 60068-2-30, IEC 60068-2-14, IEC
60255-21-1, IEC 60255-21-2. The equipment is intended for indoor use only. If it is
required for use in an outdoor environment, it must be mounted in a specific
cabinet or housing which will enable it to meet the requirements of IEC 60529
with the classification of degree of protection IP20.
•
R&TTE Compliance: Radio and Telecommunications Terminal Equipment (R&TTE)
directive 99/5/EC. Conformity is demonstrated by compliance to both the EMC
directive and the Low Voltage directive, to zero volts.
Chapter 1 – Introduction
RT412