Parameter Group Zero Access And Navigation; Analog And Digital Input Configurations; Terminal Mode (P-12 =0) - Invertek Drives OPTIDRIVE E2 Installation And Operating Instructions Manual

7.3.1.

Parameter group zero access and navigation

When P-14 = P-37, all P-00 parameters are visible. Default value is 101.
When the user scrolls to P-00, pressing
20). The User can then scroll to the required P-00 parameter.
Pressing once more will then display the value of that particular group zero parameter.
For those parameters which have multiple values (e.g. software ID), pressing the
that parameter.
Pressing returns to the next level up. If
up (main parameter level, i.e. P-00).
If or is pressed whilst on the lower level (e.g. P00-05) to change the P-00 index, pressing <NAVIGATE> quickly displays that
parameter value.

8. Analog and Digital Input Configurations

8.1.

Terminal mode (P-12 =0)

P-15 Digital input 1 (T2)
Open: Stop (disable)
0
Closed: Run (enable)
Open: Stop (disable)
1
Closed: Run (enable)
Open: Stop (disable)
2
Closed: Run (enable)
Open: Stop (disable)
1)
3
Closed: Run (enable)
Open: Stop (disable)
4
Closed: Run (enable)
Open: Stop (disable)
5
Closed: Run (enable)
Open: Stop (disable)
1)
6
Closed: Run (enable)
Open: Stop (disable)
7
Closed: Run (enable)
Open: Stop (disable)
8
Closed: Run (enable)
Open: Stop (disable)
9
Closed: Run (enable)
Normally Open (NO)
10
Momentary close to run
Normally Open (NO)
11
Momentary close to run
Open: Stop (disable)
12
Closed: Run (enable)
Optidrive E2 Single Phase Output User Guide
P-00 A
will display "
is then pressed again (without pressing
Digital input 2 (T3) Digital input 3 (T4)
Open : Analog speed ref
No effect
Closed : Presetspeed1
Open: Analog speed ref Open: Preset speed 1
Closed:Preset speed 1/2 Closed:Preset speed 2
Digital Input 2 Digital Input 3 Preset Speed
Open Open
Closed Open
Open Closed
Closed Closed
External trip input :
Open : Analog speed ref
Open: Trip,
Closed : Preset speed 1
Closed: Run
Open : Analog input 1
Analog input 2 reference
Closed : Analog input 2
Open: Run Open : Analog speed ref
Closed: Fast Stop Closed : Preset speed 1
External trip input :
No effect Open: Trip,
Closed: Run
External trip input :
Open: Run
Open: Trip,
Closed: Fast Stop
Closed: Run
Digital Input 3
Open
No effect
Closed
Open
Closed
Digital Input 3
Open
Open: Run
Closed
Closed: Fast Stop
Open
Closed
Normally Closed (NC) Open : Analog speed ref
Momentary open to stop Closed: Preset speed 1
Normally Open (NO)
Normally Closed (NC)
Momentary close for Fast
Momentary open to stop
stop
Open: Fast Stop
Open : Analog speed ref
(disable)
Closed : Preset speed 1
Closed: Run (enable)
www.invertek.co.uk
A
", where represents the secondary number within P-00. (i.e. 1 to
and keys will display the different values within
or
Analog input (T6)
Analog input 1
reference
Analog input 1
reference
Preset Speed 1
Open: Preset speeds
1-4
Preset Speed 2
Closed: Max Speed
(P-01)
Preset Speed 3
Preset Speed 4
Analog input 1
reference
Analog input 1
reference
Analog input 1
reference
Analog input 1
reference
Analog input 1
reference
Analog Input 1 Preset Speed
Open Preset Speed 1
Open Preset Speed 2
Closed Preset Speed 3
Closed Preset Speed 4
Analog Input 1 Preset Speed
Open Preset Speed 1
Open Preset Speed 2
Closed Preset Speed 3
Closed Preset Speed 4
Analog input 1
reference
Analog input 1
reference
Analog input 1
reference
), the display changes to the next level
Comments
5 Preset speeds
selectable.
Note: Max speed (P-01)
must be set to the highest
sped required.
Connect external
thermistor type PT100 or
similar to digital input 3
Switches between analog
inputs 1 and 2
Close digital input 2 to
carry out a fast stop (P-
24), provided P-05=0
Connect external
thermistor type PT100 or
similar to digital input 3
Close digital input 2 to
carry out a fast stop (P-
24), provided P-05=0
Close digital input 2 to
carry out a fast stop (P-
24), provided P-05=0
Close digital input 3 to
carry out a fast stop (P-
24), provided P-05=0
15