Table of Contents
Advertisement
EN
CONNECTION TO POWER MAINS
To connect the fan to the electric mains:
— Run the cable through the gland in the rear part of the casing (Fig. 57).
— Strip the insulation leaving 7–8 mm long tips.
— Undo two screws and remove the control unit lid (Fig. 57).
— Complete the electrical connections according to the external connections diagram (Fig. 58 and 59).
— Clamp the wires with the retention clip (Fig. 57).
— Assemble the fan: re-install the lid, filter etc.
— Apply supply voltage to the fan.
57
28
Advertisement
Table of Contents
