Breezy 160-200-E (Smart)
8. Install the decorative panels.
2
1
CONNECTION TO POWER MAINS
The product is connected to a single-phase 230 V, 50 Hz AC mains supply by means of a power cable with a factory-fitted plug.
ATTENTION!
Do not connect the product via any type of speed controller - thyristor, autotransformer, frequency controller, etc.
IN THE EVENT OF INTERFERENCE WITH THE PRODUCT DESIGN OR CHANGES TO THE
WIRING DIAGRAM, THE MANUFACTURER IS NOT RESPONSIBLE FOR THE PRODUCT'S
www.ventilation-system.com
THE PRODUCT CONSISTS OF ELEMENTS THAT ARE AN INTEGRAL PART OF THE
THE CORRECT OPERATION OF THE PRODUCT IS ONLY POSSIBLE IN THE
CONFIGURATION AND DESIGN SUPPLIED BY THE MANUFACTURER.
SERVICEABILITY AND DOES NOT ASSUME ANY WARRANTY OBLIGATIONS
9. Open the air intakes before switching on the system.
If the air intake is not open and the product is running, it may damage the
unit and cause it to malfunction.
PRODUCT.
9