Table of Contents
Advertisement
EN
3.3. Set the fire-safety swing damper to the mounting position (Fig. 38).
3.4. Mark the dowel holes (Fig. 39).
3.5. Drill the dowel holes and insert the dowels (Fig. 40).
3.6. Secure the fire-safety swing damper with self-tapping screws (Fig. 41).
3.7. Rotate the fan to match the mounting hole of the casing with that of the swing damper, and mark the dowel holes (Fig.
42).
3.8. Rotate the fan to access the markings, drill the dowel holes and insert the dowels (Fig. 43).
3.9. Rotate the fan and align the mounting holes of the casing and those of the swing damper, and secure the fan with self-
tapping screws (Fig. 44).
3.10. Complete steps 1.2 to 1.4. in the reverse order.
VN E 80 K
fan installation steps:
4.1. Complete step 3.1.
4.2. Complete steps 2.2. and 2.4.
4.3. Complete steps 3.3. and 3.9.
4.4. Complete steps 2.2. to 2.4. in the reverse order.
VNV-1 E 80 KV, VNV-1 E 80 KVK
VNV-1 E 80 KP
VNV-1 E 80
KV 80, KVK 80
and
fans consist of
fan assembly and
and
KP 80
fan casings correspondingly.
These fans are installed in two phases: first the casing installation and then the final installation:
- the casing is installed during the shell and core phase;
VNV-1 E 80
- the final installation, which is performed after the fit-out works, includes the installation of
fan assembly into
KV 80, KVK 80
KP 80
or
casing.
KV 80
KVK 80
The
and
installation steps are as follows:
5.1. Complete steps 1.2. and 1.4.
5.2. Remove the fan assembly from the casing (Fig. 45 and 46).
5.3. Bend the mounting bracket to the necessary length according to the actual wall measurements and secure it to the fan
casing with M4 screws supplied with the unit (Fig. 47-50);
16
Advertisement
Table of Contents
