Fitting The Hood Canopy; Electrical Connection - Zanussi ZHC 941 Installation, Use And Maintenance Handbook

○ ○ ○ ○ ○ ○ ○ ○ ○ ○

Fitting the hood canopy

• Fix the hood canopy C to the telescopic frame
(fig. 5) using 4 screws M6x10 provided in bag
(2).
• Remove the metal grease filters (see paragraph
on Maintenance).

Electrical connection

• Take the two parts of the connection box from
the packing (3).
• Fasten the two connectors together, and insert
them into the connection box. (Fig. 6)
• Close the electrical connection box using 2
screws size 2.9x12.7 provided in bag (3).
• Fasten the electrical connection box to the hood
canopy support using 2 screws size 2.9x6.5
provided in bag (3).
• Replace the metal grease filters (see paragraph
on Maintenance).
• Once the hood has been connected to the
mains, check that the lighting, motor and speed
change are all working correctly.
Fig. 6
16
○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○ ○ ○
Fig. 5
GB
○ ○ ○ ○