Maintenance; Metal Grease Filters; Active Carbon Filter - Zanussi ZHC 941 Installation, Use And Maintenance Handbook

○ ○ ○ ○ ○ ○ ○ ○ ○ ○

MAINTENANCE

○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Regular maintenance and cleaning will ensure good performance and reliability, while
extending the working life of the hood.Special attention should be paid to the grease
filters and to the charcoal filters when the hood is used in the recirculation mode.

Metal grease filters

• Cleaning
The metal grease filter should be cleaned
every two months with normal usage and
can be cleaned in a dishwasher or by hand
using a mild detergent or liquid soap.
• Replacement
Remove the filters one at a time, pushing
the handle towards the rear of the hood
(fig.7). When replacing,ensure that the
handle faces outwards.
ATTENTION - There could be a possible
fire hazard if the filters are not replaced
according to these instructions

Active carbon filter

• Operation
Active carbon filters can withhold odours up
to saturation.They cannot be washed or
regenerated and must therefore be replaced
every 4 months, or more frequently if
intensely used.
• Replacing
Take off the metal grease filters (fig.7) and
remove the activated charcoal filter from its
housing by turning the clips provided
(fig.8).Fit the new activated charcoal filter and
replace the metal grease filters.
ATTENTION - There could be a possible
fire hazard if the filters are not replaced
according to these instructions
18
○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○ ○ ○
Fig. 7
Fig. 8
GB
○ ○ ○ ○