1. Manuals
  2. Brands
  3. Zanussi Manuals
  4. Ventilation Hood
  5. ZHC 930 X
  6. Installation, use and maintenance handbook

Zanussi ZHC 930 X Installation, Use And Maintenance Handbook

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Cappa
Cooker hood
Hotte de cuisine
Dunstabzugshaube
Dampkap
ZHC 930 X
MANUALE DI INSTALLAZIONE, USO E MANUTENZIONE
INSTALLATION, USE AND MAINTENANCE HANDBOOK
MANUEL D'INSTRUCTIONS POUR L'INSTALLATION, L'EMPLOI ET L'ENTRETIEN
HANDBUCH FÜR INSTALLATION, BEDIENUNG UND WARTUNG
INSTRUCTIES VOOR MONTAGE, GEBRUIK EN ONDERHOUD

Advertisement

Table of Contents
loading

Related Manuals for Zanussi ZHC 930 X

Summary of Contents for Zanussi ZHC 930 X

  • Page 1 Cappa Cooker hood Hotte de cuisine Dunstabzugshaube Dampkap ZHC 930 X MANUALE DI INSTALLAZIONE, USO E MANUTENZIONE INSTALLATION, USE AND MAINTENANCE HANDBOOK MANUEL D’INSTRUCTIONS POUR L’INSTALLATION, L’EMPLOI ET L’ENTRETIEN HANDBUCH FÜR INSTALLATION, BEDIENUNG UND WARTUNG INSTRUCTIES VOOR MONTAGE, GEBRUIK EN ONDERHOUD...
  • Page 2 Dear Customer, If you follow the recommendations contained in this Instruction Manual, your appliance will give you constant high performance and will remain efficient for many years to come.

  • Page 3: Installation

    INSTALLATION • The manufacturer will not be held liable for any damages resulting from incorrect or improper installation. • The minimum safety distance between the cooker top and the extractor hood is 650 mm. • Check that the mains voltage corresponds to that indicated on the rating plate fixed to the inside of the hood.
  • Page 4 Dimensions...
  • Page 5 Components...
  • Page 6 Drilling the Ceiling/shelf and fixing the frame DRILLING THE CEILING/SHELF • Use a plumb line to mark the centre of the hob on the ceiling/support shelf. • Place the drilling template 21 provided on the ceiling/support shelf, making sure that the template is in the correct position by lining up the axes of the template with those of the hob.

  • Page 7: Ducted Version Air Exhaust System

    Upper frame • Align the power supply cable feed hole • Fix the upper frame to the ceiling or shelf using: • For concrete ceilings, use the appropriate plugs for the screw size (not provided). • For hollow brick ceilings of wall thickness of approximately 20 mm: use 4 plugs 11 and 4 screws 12h, provided.

  • Page 8: Electrical Connection

    Flue assembly - Mounting the hood body • Position the upper chimney section and fix the upper part to the frame using the 2 screws 12c provided. • Similarly, position the lower chimney section without fixing it, ensuring that the outlet from connector 15 is in line with the chimney intake.

  • Page 9: Control Panel

    Control panel Light Switches the lighting system on and off. Motor running led. Flashes when the grease filters are saturated. Intensive speed led. Flashes when the activated carbon odour filters are exhausted. Motor Switches the extractor motor on and off at low speed. Used to provide a contin- uos and silent air change in the presence of light cooking vapours.

  • Page 10: Grease Filters

    Grease filters CLEANING METAL SELF-SUPPORTING GREASE FILTERS Alarm signal reset • Switch of the lights and extractor motor. • Press button V3 for at least 3 seconds, until the leds start to flash. Cleaning the filters • The filters are washable and must be cleaned when led S1 flashes or at least every 2 months of operation, or more frequently for particularly heavy usage.

  • Page 11: Activated Charcoal Filter (Recirculation Version)

    Activated charcoal filter (Recirculation version) REPLACING THE ACTIVATED CHARCOAL FILTER • The filter is not washable and cannot be regenerated. It must be replaced when led S2 flashes or at least every 4 months. The alarm signal will only light up when the extractor motor is switched on.

Table of Contents