Technical Data - TZS First AUSTRIA FA-5450-3 Instruction Manual

INSTRUCTIONS FOR USE
1. Before first use, fill the kettle with clean water to maximum capacity and boil. Discard the water and repeat.
2. The kettle should always be unplugged when filling or adding water.
3. Fill the kettle with water to the desired level. Do not overfill or there will be a risk of spillage or spitting.
4. Do not fill with more than 0.35 litres of water (up to „MAX" indication).
5. Place the power base on a dry flat surface.
6. Place the kettle on the power base. The electrical connections will be made automatically as the kettle slides
onto the power base.
7. Plug the cordset into an earthed power socket.
8. The appliance is switched on by pressing the ON/OFF switch. The pilot light will come on
9. Do not remove the kettle from the power base without switching off first.
10. To pour water, lift the kettle from the power base and pour.
HOW TO CARE FOR YOUR KETTLE
Wipe the exterior of the kettle with a soft, damp cloth or sponge. Remove stubborn spots with a cloth moistened
with mild liquid detergent. Do not use abrasive scouring pads or powders. Never immerse the kettle in water or
other liquids.
From time to time depending on the nature of your water supply, a lime scale deposit is naturally formed and
can be found mostly adhered to the heating element and reduces the heating capacity. The amount of lime scale
deposited (and subsequently the need to clean or descale) largely depends on the water hardness in your area and
the frequency with which the kettle is used.
Limescale is not harmful to your health. But if poured into your beverage, it can give a powdery taste to your drink.
Therefore, the kettle should be descaled periodically as indicated below:
DESCALING
Descale the kettle regularly. With normal use, at least twice a year.
1. Fill the kettle up to „MAX" with a mixture of one part ordinary vinegar and two parts water. Switch on and wait
for the appliance to switch off automatically.
2. Let the mixture remain inside the kettle overnight.
3. Throw the mixture away next morning.
4. Fill the kettle with clean water up to „MAX" and boil again.
5. Throw away this boiled water to remove any remaining scale and vinegar.
6. Rinse the inside of the kettle with clean water.
360° CONNECTOR BASE
The 360° connector between the kettle and its base means that the kettle can be located at any point on the base.
This is ideal for left and right-handed users as the kettle can be positioned conveniently on your kitchen counter.

TECHNICAL DATA:

220-240 V • 50/60 Hz • 800 W
Environment friendly disposal
You can help protect the environment! Please remember to respect the local regulations: hand in the non-
working electrical equipments to an appropriate waste disposal center.
3