Operation; General Operation - Renkforce AN-8006 Operating Instructions Manual

Cd-tuner
Hide thumbs Also See for AN-8006:
Table of Contents

Advertisement

Available languages

Available languages

Operation

Do not turn the CD tuner on before you have read and understood these operating instructions.
Check all the connections again. When you have done so, reconnect the negative pole of the
car battery.

General Operation

Button POWER / MUTE (1)
This button switches the radio on and off.
Briefly press this button while the device is turned off to turn it on or - if the device is on - to briefly mute the current
playback. Repeated pressing deactivates the mute function again.
Press this button for approx. 2 seconds to switch off the device.
To switch the device on, you can also press any other button (also on the remote control).
The mute function can also be deactivated by turning or pressing the volume control/selection control
(23).
Display (3)
The display (3) shows all information in dependence of the presently active function.
RESET button (28)
This button resets all the settings to the original settings that were made in the factory.
Press this button in the following cases:
- when you have completed the installation and connection
- when the CD tuner does not react to the operation of buttons any more
- when the display shows undefined characters.
64
Operating Instructions
English

Advertisement

Table of Contents
loading

Table of Contents