Digicom Michelangelo Gateway User Manual page 9

Michelangelo Gateway
Overview
Other Setup
Overview
Other setup is required only for the following situations:
Your LAN has a Router or an existing DHCP Server.
The default IP Address range is not suitable for your situation.
You wish to use a password to protect the configuration data.
You wish to take advantage of the
Other Setup
Except in the following circumstances, no other configuration is required.
If using an existing DHCP Server:
Configure it to provide Michelangelo Gateway's IP Address as the Default Gateway.
The DHCP Server in Michelangelo Gateway should be disabled. This setting is on the
Device's DHCP Server Settings unsuitable
If your LAN already has some devices using fixed IP Addresses, you need to set the IP Address range used by
the DHCP Server to be compatible. The DHCP Server settings are on the
Your LAN has a Router
The Routing feature can be completely ignored if you do not have a router in your LAN.
If you DO have a router, it is necessary to configure BOTH the Router and the Routing table in Michelangelo
Gateway correctly. See
advanced features
Routing for details.
SETUP
of Michelangelo Gateway.
LAN Tab
LAN Tab
.