Digicom Michaelangelo Gateway 8E4088 Specifications

Michelangelo Gateway

DESCRIPTION

Share the ADSL high rate with all the computers of
your LAN.
Michelangelo Gateway is the ideal solution to surf the
Internet with all the computers of your office using a
single Internet account and saving up the cost of the
Internet service over ADSL.
Easy to install, you can set it up using a common
browser.
It has a 10BaseT (WAN) Ethernet port to be
connected to the ADSL modem and 1 10/100 Fast
Ethernet port for the LAN connection.
Michelangelo Gateway has several advanced
functions for a network efficient and optimized
management:
DHCP server for the automatic assignment of IP
addresses, NAT Router for the account sharing,
PPPoE (PPP over Ethernet) for ADSL connection (or
direct connection to the ISP), Security Groups, Access
Control, Virtual Servers and Exposed Computer.
It complies with any platform supporting TCP/IP
protocol.
The maximum performance with the latest xDSL technologies
up to 8 Mbps. Solutions for point-to-point (HSDL) and
For further information: international@digicom.it or http://www.digicom.it
RJ45 10/100 Mbps Autosensing LAN
port
10 Mbps WAN port
4 Leds: LAN Link, LAN Activity, WAN
Link, WAN Activity
Web based configuration via Browser
TCP/IP and DHCP Server Support
PPPoE RFC 2516 Support
NAT, NAT Exports, Exposed Computer
Support
Virtual Servers, Security Groups, Access
Control Support
Internet (ADSL) applications.
Michelangelo Gateway 14.09.2001
Code: 8E4088