Msp Garage Installation - RGBlink MSP 316H User Manual

5.2 MSP Garage Installation

1. Unscrew the fixed screws with a screwdriver, and remove the block, as shown in figure:
2. Install the small converters to the slots, as shown in figure:
3. Fix the block to the MSP rack with fixed screws, as shown in figure:
4. Connect one end of the DC power cord to the DC power interface of the MSP rack and
the other end to the power interface of the small converter, as shown in figure:
According to above method, connect the small converters one by one with the DC
power cords, user can install up to 10 different types of small converters in one frame.
5. Connect the small converters to the devices with the specific cables.
6. Plug in the power cord (AC 85~264V IEC-3 port), and push the power switch to the ON
position, the device will enter normal working.
MSP 316H User Manual
15