PROAIM P-CST Assembly Manual

Heavy-duty 150mm camera tripod stand with spreader

Heavy-Duty 150mm Camera Tripod Stand

with Spreader

(P-CST)

A s s e m b l y M a n u a l

What's In The Box

Please inspect the contents of your shipped package to ensure you have received everything that

is listed below.

Note: If you have purchased ( P-CST-150 ) kit, you will receive the following:

Aluminum Tripod Spreader

150mm Camera Tripod Stand

No part of this document may be reproduced, stored in a retrieval system, or transmitted by any form or by any means,

electronic, mechanical, photo-copying, recording, or otherwise, except as may be expressly permitted by the applicable copyright

statutes or in writing by the Publisher.

Table of Contents

Need help?

Do you have a question about the P-CST and is the answer not in the manual?

Page 1 What’s In The Box Please inspect the contents of your shipped package to ensure you have received everything that is listed below. Note: If you have purchased ( P-CST-150 ) kit, you will receive the following: Aluminum Tripod Spreader 150mm Camera Tripod Stand All rights reserved.
Page 2 Note: If you have purchased (P-CST-150-BLK) kit, you will receive the following: Proaim Heavy-Duty 150mm Camera Tripod Stand (P-CST-150-BLK ) Aluminum Tripod Spreader Aluminum Tripod Spreader Setup  Firstly, take out the Aluminum tripod spreader, spread it on the floor and then open its legs...
Page 3  At last, your Tripod Stand with Spreader is fully assembled as shown in the image. YOUR PROAIM HEAVY-DUTY 150MM CAMERA TRIPOD STAND WITH SPREADER ALL DRESSED UP AND READY TO GO! (SHOWN WITH OPTIONAL ACCESSORIES) Warranty: We offer one year warranty for our products from date of purchase. Within this period of time, we will repair it without charge for labor or parts.

P-cst-150