Contacts - Vega Absolute TP-11 User Manual

CONTACTS

Converter has 10 contacts, see table below:
Contact Designation on the board
1 OUT_2
2 OUT_1
3 +VPWR
Ʇ
4
5 CL-
6 CL+
7 COUNT_2
Ʇ
8
9 COUNT_1
Ʇ
10
Ʇ
Ground contacts 8 and 10 are used for connection of security inputs COUNT_1 and
COUNT_2.
Security inputs of the device are used to connect circuits with the following types of
NO contacts:
reed switch (Herkon);
mechanical pushbutton;
open-drain output.
While security input connected the device monitors its state change (closure/unlocking
or both of it – depend on the settings). Should the security input triggering, the device is
activated and sends an alarm message to the network.
12
Description
Open-drain output 2
Open-drain output 1
Power "+"
Power "-"
4-20 mA "-"
4-20 mA "+"
Security input 2
Ground
Security input 1
Ground
Revision 12 of 12 October 2021
Vega TP-11 / User Manual