Indication - Vega Absolute TP-11 User Manual

INDICATION

There is a one red LED on the board. The indication is only used when the device is
activated in the LoRaWAN network and when the operating modes are changed.
LED on the board
LED SIGNAL
In case of connection attempt fail, the device will continue to accumulate
data and will attempt to connect to the network every 6 hours
14
Short flashings
One long flashing
during 5 sec
Three flashings each by
1 sec
Vega TP-11 / User Manual
MEANING
Linking to the network in progress
The device has been successfully
connected to the network and is in
active mode
Linking to the network has been failed
or the device switched to the
"Storage" mode
Revision 12 of 12 October 2021