Indication - Vega Absolute M-BUS-1 User Manual

M-BUS-1 / User Manual

INDICATION

There is a one red LED on the board. The indication is only used when the device is
activated in the LoRaWAN network and when the operating modes are changed.
LED on the board
LED signal
In case of connection attempt fail, the device will continue to
accumulate data and will attempt to connect to the network every 6
hours
Revision 10 27 May 2019
-
Series of short flashings
One long flashing
Three long flashings
Meaning
Linking to the network
The device connected to the network
and is in active mode
Linking to the network is unsuccessful
or the device switched to the «Storage»
mode
11