Advertisement
A S S E M B L Y
Section
Contents
1.0
Important notes
2.0
Tools required
Hardware & parts list
3.0
4.0
Assembly
Assembly
4.0
5.0
Installation
5.0
Installation
6.0
Cleaning/ finishing
7.0
Guarantee - terms and conditions
1.0 IMPORTANT NOTES
To ensure safe and stable installation:
1. The assembled Fire Surround must be fixed / secured to wall.
2. The wall must be sturdy and in good repair.
3. Some walls require alternative fixings (not included).
4. When drilling into the wall, check for hidden pipes and cables.
5.There are two options for construction of this surround.
A - with rebates - If you are installing this surround with a gas fire, or an electric fire where there is space in the wall to recess
the fire, this means the laminate / marble is up against the wall.
B - with out rebates - If using this surround with an electric fire and a flat wall you will need to remove the rebates, instead use
the spacer frame from the fire.
2.0 TOOLS REQUIRED
Cross head screwdriver PZ2 (3 inches in length or greater)
Drill, 6mm and a 2mm suitable drill bit
Pencil
Tape measure
3.0 HARDWARE & PARTS LIST
I N S T R U C T I O N S
Page No.
2
2
2
3
4
4
5
5
5
2
GB IE
© 2021 Focal Point Fires Ltd.
Advertisement
