Advertisement
Quick Links
ASSEMBLY & INSTALLATION INSTRUCTIONS
Focal Point Fires plc.
Christchurch, Dorset BH23 2BT
Tel: 01202 499330
Fax: 01202 499326
www.focalpointfires.co.uk
e : sales@focalpointfires.co.uk
Questions or problems with your appliance?
Don't take it back to the store
01202 588601
just give us a call on
lines open between 9am and 5pm, Monday to Friday
Please note : Except where otherwise stated, all rights, including copy-
right in the text, images and layout of this booklet is owned by Focal
Point Fires plc. You are not permitted to copy or adapt any of the con-
tent without the prior written permission of Focal Point Fires plc.
MODELS COVERED BY THESE INSTRUCTIONS
F820588 FPFBQ390 WICHITA FIRE SURROUND WHITE
F820589 FPFBQ391 WICHITA FIRE SURROUND WALNUT
F820595 FPFBQ411 WICHITA FIRE SURROUND OAK
we're here to help
1
All instructions must be handed to the user for
safekeeping.
Revision B - 05/14
© 2014 Focal Point Fires plc.
Advertisement
Related Manuals for FocalPoint FPFBQ390 WICHITA FIRE SURROUND WHITE
Summary of Contents for FocalPoint FPFBQ390 WICHITA FIRE SURROUND WHITE
- Page 1 ASSEMBLY & INSTALLATION INSTRUCTIONS MODELS COVERED BY THESE INSTRUCTIONS F820588 FPFBQ390 WICHITA FIRE SURROUND WHITE F820589 FPFBQ391 WICHITA FIRE SURROUND WALNUT F820595 FPFBQ411 WICHITA FIRE SURROUND OAK Focal Point Fires plc. Christchurch, Dorset BH23 2BT Tel: 01202 499330 Fax: 01202 499326 www.focalpointfires.co.uk...
- Page 2 A S S E M B L Y I N S T R U C T I O N S GB IE Section Contents Page No. Important notes Tools required Hardware & parts list Assembly Installation Cleaning/ finishing Guarantee - terms and conditions 1.0 IMPORTANT NOTES To ensure safe and stable installation: 1.The assembled Fire Surround must be fixed / secured to wall.
- Page 3 4.0 ASSEMBLY GB IE STEP 1 Fixings Parts A x 4 PCS ① ② ③ TAKE CARE - LAY THE SURROUND ON A SOFT SURFACE THAT WILL NOT DAMAGE THE SURROUND. Lay the left leg (2) and the right leg (3) along with the top panel (1) on the floor. Next insert 4 wood dowels (A) in to each leg with a small amount of glue (G).
- Page 4 5.0 INSTALLATION GB IE Fixings C x 2 PCS D x 4 PCS E x 2 PCS F x 2 PCS With a pencil mark out the desired height where you would like the mirror brackets (F) to be situated on the rear of the legs. To avoid splitting the leg, pre drill the bracket holes with a 2mm drill bit.