Optional Mode; Displaying The Optional Mode Menu; System Menu - Furuno FCV-600L Operator's Manual

OPTIONAL MODE

2.1 Displaying the Optional
Mode Menu
The Optional mode mainly contains less-of-
ten used functions which once preset do not
require frequent adjustment. You can access
the Optional mode menu as follows:
1. Turn off the equipment.
2. Press the POWER key while pressing any
key. The following display appears.
OPTIONAL MODE
t: SELF TEST
s: CLEAR MEMORY
t: DEMO
SELECT MODE
Figure 2-1 Optional mode selection display
3. Operate the Cursor Pad to select mode
desired.
Note: SELF TEST and CLEAR
MEMORY are explained in the chapter
on maintenance.
4. To escape from the Optional mode, turn
off the power.
Note: Wait at least five seconds before reap-
plying the power.

2.2 System Menu

There are three system menus: system menu
1, system menu 2, and system menu 3.
1. Press the MENU ESC key.
2. Press key to select GO TO SYSTEM
MENU.
3. Press sat the GO TO SYSTEM MENU.
The System menu 1 appears.
4. With the cursor selecting MENU, oper-
ate the Cursor Pad to select system menu
desired.
SYSTEM MENU 1
MENU
DEPTH UNIT
SPEED UNIT
TEMP UNIT
ZOOM MARK
F/A LEVEL
TEMP GRAPH
LANG
DISP SEL
DRAFT
: To select item
: To set condition
ts
ESC: ESCAPE
SYSTEM MENU 2
MENU
NAV DSP
NMEA
BEARING
SPD SEL
Press t
TMP SEL
at MENU 3.
SPD ADJ
TMP ADJ
(ADJUSTABLE OWN SENSOR ONLY)
OWN SENSOR
SPEED
— —. — kt
: To select item
: To set condition
ts
ESC: ESCAPE
SYSTEM MENU 3
MENU
BASIC RANGE1
RANGE2
RANGE3
RANGE4
RANGE5
RANGE6
RANGE7
RANGE8
ZOOM RANGE
B/L RANGE
: To select item
: To set condition
ts
ESC: ESCAPE
Figure 2-2 System menus
1 2 3
m ft fa pb
kt MPH km/h
C F
OFF ON
WEAK MED STRG
OFF ON
English
GRAI GRA2
0.0 [-20~ +20]
Press s at MENU 1.
1 2 3
OFF L/L R/B CSE
Ver1.5 Ver2.0
TRUE MAG
OFF OWN NMEA
OFF OWN NMEA
0 % [-50 ~ +50]
0.0 F [-20 ~ +20]
OWN SENSOR
TEMPERATURE
— —. — F
Press s at MENU 2.
1 2 3
15 ( 7~1500)
30 ft
60
120
200
400
600
1500
30
10 20
15