Furuno FCV-620 Operator's Manual

COLOR LCD SOUNDER FCV-620/585
The purpose of this guide is to provide the basic operation for this equipment. For more detailed
information, see the Operator's Manual.
Gain, Range
VRM
Color bar
Fish
Bottom
Depth
Display unit (for FCV-620)
Control
• Opens/closes menu.
• Escapes from current operation.
MENU/ESC
• Goes back one hierarchy level in menu operation.
• Closes setting window.
• Moves cursor on the menu.
• Adjusts settings.
(TrackPad)
• Moves VRM (Variable Range Marker) by using
• Saves settings.
ENTER
• Advances one hierarchy level in menu operation.
• Opens display range setting window.
RANGE - Choose range setting method (Auto or Manual) by using
- On manual mode choose range desired by using
MARK Outputs L/L (latitude/longitude) position to a plotter.
FUNC Opens menu window registered.
• Rotating: Adjusts gain.
• Push: Opens automatic gain setting window.
GAIN
- Choose gain mode by using
- Adjust gain offset by using
Selects a display mode among the following; NAV1: nav data mode 1, ZOOM (LF):
MODE LF + zoom mode, LF: LF single mode (50 kHz), DUAL: dual frequency mode, HF:
HF single mode (200 kHz), ZOOM (HF): HF + zoom mode, NAV2: nav data mode 2.
• Turns power on/off.
• Opens display contrast setting window or brilliance setting window.
/BRILL
- Choose Contrast or Brill by using
- Adjust contrast or brilliance by using
Operator's Guide
or
Transducer frequency (50 kHz/200 kHz)
Picture advance speed
(or Battery voltage)
TrackPad
Alarm icon
Range scale
Echo detected by high-frequency (HF)
Echo detected by low-frequency (LF)
Function
or except for nav mode.
or .
or .
.
or .
or .
or .
MLG-23740-A