Advertisement
Quick Links
Chair
865JCC
Assembly/
Instruction Manual
Important Document
Product Code (Attached to bottom of the duckboard)
Quality label (Attached to bottom of the duckboard)
Caution label (Attached on the surface of the foot step
Characters of Natural wood : This product uses natural wood
Because of the characters of natural materials, the woodgrain or color may differ one by one. And due to breathing of the materials, it may cause warpagge
or slight distortion depending on the circumstances. These features can be enjoyed as natural wood taste. This unique material increases its taste
as you use it.
You need a Phillips Screwdriver
for assembling. Please prepare it beforehand.
Do not use an Electric driver as it may cause a
damage on the product.
Advertisement
Related Manuals for Okamura 865JCC
Summary of Contents for Okamura 865JCC
- Page 1 Chair You need a Phillips Screwdriver for assembling. Please prepare it beforehand. Do not use an Electric driver as it may cause a 865JCC damage on the product. Assembly/ Instruction Manual Important Document Product Code (Attached to bottom of the duckboard)
- Page 2 Please check before assembling About the fixing height of Seat and Foot step The heights of the seat and the foot step of this chair can be changed in 4 positions. Please determine the best position based on the actual heights of the user and the desk. Check before assembly Set the seat and the foot step in the same combination of the figure shown left. (A, B, C, D) Little < A < B < C< D < Big Parts list ( Make sure to check the information below before you start assembling.) Actual size Connecting bolt Protection Sticker （ M6 x 50mm ） X 10 X 10 X 1 Note : Use a Phillips screwdriver for assembly. Do not use an electric screwdriver or power tools, as they may damage the product. Use a manual scewdriver instead. Seat x 1 Back board x 1 Right leg frame Reinforcement bar x 1 Left leg frame Foot step x 1...
- Page 3 Attach the protection stickers (イ) at the points where the chair coｍes into contact with a desk. The stickers protect the chair and desk from scratcing each other. Use scussors to cut out portionss of the appropriate size. And attach them where the desk, chair and other items come into contact with each other. Attach the stickers to flat surfaces. If a surface is dirty, wipe it clean before applying th sticker. Ｃｈａｎｇｅ ｏｆ ｔｈｅ ｈｅｉｇｈｔ of the Seat and the Foot step The seat and the foot step can be changed their heights in order to match the user's height. [ Change of the seat and the foot step ] (1) Untighten and take off all the connecting bolts, binded to the seat and the foot step. (2) Untighten either side of the connecting bolts, binded to the back board and the reinforcement bar. (3) Referring to "About the fixing height of Seat and Foot step", decide the height postions of the seat and the foot step, and install them at those positions. * In case that the foot step is not necessary, install it to the bottom of the chair. (4) Tighten all the connecting bolts firmly. * Causuion : You must install the foot step in any case. * Example for a grown child Okamura Corporation Internation al Sales and Marketing Div. 2-14-27, Akasaka, Minato-ku, Tokyo 107-0052 Japan http://www.okamura.co.jp...
Need help?
Do you have a question about the 865JCC and is the answer not in the manual?
Questions and answers