Page 1
O f f i c e S e a t i n g I n s t r u c t i o n s f o r U s e OKAMURA CORPORATION INTERNATIONAL SALES & MARKETING DIVISION 2-14-27, Akasaka, Minato-ku, Tokyo 107-0052, JAPAN...
Page 2
Soft caster Hard caster sunlight. No remodeling. Okamura will have no Adjustable armrests responsibility for any disadvantage caused by Be careful not to get remodeling. For maintenance your fingers, hand or...
Page 3
Part names Adjustable range Headrest (option) 23° Back Reclining lock/ release lever Hanger (option) 60mm Seat height Adjustable arm (2 3/8”) adjustment lever 100mm (4”) Seat Seat slide lever Frame 50mm (2”) Lumbar support Reclining tension 100mm Caster (option) adjustment lever (4”) Gas lift mm (inch)
Page 4
Operation guide Seat height adjustment Seat depth adjustment Adjust the seat height using the Seat height lever Adjust the seat depth by sliding the seat forward or located at the front of the right armrest. The seat will back within a range of 50 mm (2”) using the Seat lower if you lift the lever while seated, and it will stop at slide lever on the bottom left of the seat.
Page 5
Operation guide Reclining adjustment Reclining resistance adjustment Adjust the back recline by using the Reclining lock/ Adjust the reclining resistance by using the release lever located at the front of the left arm. Click Reclining tension adjustment lever on the bottom the lever in the tilted position to lock reclining.
Page 6
Operation guide Adjustable arm height adjustment Adjusting Lumbar support (option) Release the height lock using the height adjustment Move the Lumbar support on the back side of button on the bottom of the arm pad. The arm height the seat back, up and down directly. The Lumbar can be adjusted up and down within a range of 100 support can be moved up and down within a range mm (4”) by pushing and holding the button.
Page 7
Operation guide for options Materials Headrest (option) attachment and replacement Part Materials Body Glass-reinforced polyamide >PA-GF< (1) Insert the grooves of the Headrest into the backside of the Back seat back. Frame Die-cast aluminum >ADC< Headrest (2) Secure it with a fastening bolt. Outer shell Glass-reinforced polyamide >PA-GF<...
Page 8
Troubleshooting Problem Check Solution Page Are you sitting on the seat Adjust the seat height while when adjusting the seat not seated on the seat. height? The seat does not rise. Is the seat height in its highest The seat cannot rise beyond position? the highest position.
Need help?
Do you have a question about the Sabrina and is the answer not in the manual?
Questions and answers