Overview Of Steer Reference (Pilot); Steer Reference (Mem) - Furuno FI-301 Operator's Manual

8.3.1

Overview of steer reference (Pilot)

Steer reference function
(MEM)=Compass heading
stored in 1 or 2
memories (TAC)
(BTW)=Bearing to waypoint
(CTS)=Course to steer to
waypoint, corrected
for drift and current
(AWA)=Apparent wind angle
(OFF)=Steer pilot off
When any steer reference function is activated, the text on the display will be copied
and shown on all Multi Control instruments in your Nexus Network.
8.3.2

Steer reference (MEM)

This function requires the FI-30 or NMEA compass transducer.
The function is semi automatic, i.e. when activated, present
compass heading is copied to memory. You can later change the value manually.
Select sub-function (Pilot), press SET.
The text (OFF) or the last selected steer reference function flashes.
To select steer reference (MEM), press PLUS.
To activate the function, press SET. MEM is shown on the display.
The sub-function (STR) automatically displays the stored (MEM) value.
The text (MEM) and (STR) is alternating.
If you want to change the steer reference value, press SET.
The first digit flashes.
To set the new value press MINUS, PLUS and PAGE as required.
To store the value, press SET.
Reference Text on
type display
Manual
Automatic
Automatic
Manual
29