C30, Calibration Of Navigation; C30 (Ret); C31; C32 (00° Oca) - Furuno FI-301 Operator's Manual

12.3 C30, calibration of navigation

12.3.1 C30 (RET)

To return to the normal mode, press SET.
12.3.2 C31 (PAGE ATO)
This setting allows you to display the Navigate page or not.
PAGE ATO Page automatically on if Compass transducer or
GPS is connected
PAGE ON Page is always on
PAGE OFF Page is always off
12.3.3 C32 (00° OCA)
Off Course Alarm. Can be set between 00°and 99°
(00°) = Alarm is turned off.

12.3.4 C33 (00.0 VAR)

Magnetic variation. Maximum +/- 99.9°.
Easterly variation = underlining ( _ ) sign.
Westerly variation = minus ( - ) sign.
The local magnetic variation is usually printed in the sea chart.

12.3.5 C34 (Auto DEV)

Automatic compass deviation, (see 12.4.1).

12.3.6 C35 (Auto CHK)

Check of automatic compass deviation, (see 12.4.2).

12.3.7 C36 (Auto CLR)

Clear automatic compass deviation memory, (see 12.4.3).
12.3.8 C37 (000°ADJ)
Compass transducer misalignment correction, (see 12.4.4).

12.3.9 C38 (OFF SEC)

Format of position in latitude and longitude.
(OFF) = Position in degrees, minutes and 100:th of a minute.
Indicated by the sign ( . ) after the minute.
(ON) = Position in degrees, minutes and seconds.
No sign ( . ) after the minute.

12.3.10 C39 (Pilot SEA)

Damping for the optional analogue steer pilot instrument.
LOW = 1.3 sec, MID = 2.8 sec. and MAX = 11 sec.
(Available for analogue steer pilot instruments, from version 1.3).
42