Table of Contents
Advertisement
Description
1
SET+GO
2
RESIDUAL HEAT INDICATOR
3
1)
KEY TONE
4
FAULTY TONE
5
DEMO MODE
6
BRIGHTNESS
7
WATER HARDNESS
8
CLEANING REMINDER
9
SERVICE MENU
10
RESTORE SETTINGS
1) It is not possible to deactivate the tone of the ON / OFF sensor field.
1. When the appliance is turned off,
touch and hold
The display shows SET1 and "1" flashes.
2. Touch
or
3. Touch
.
4. Touch
or
of the setting.
5. Touch
.
To exit the Settings menu, touch
touch and hold
.
10.5 Automatic Switch-off
For safety reasons the appliance
deactivates automatically after some
time if an oven function operates and
you do not change any settings.
Temperature (°C)
30 - 115
120 - 195
200 - 230
After the Automatic switch-off, touch a
sensor field to operate the appliance
again.
for three seconds.
to set the setting.
to change the value
or
Switch-off time (h)
12.5
8.5
5.5
Value to set
ON / OFF
ON / OFF
CLICK / BEEP / OFF
ON / OFF
Activation code: 2468
LOW / MEDIUM / HIGH
1 - 4
ON / OFF
-
YES / NO
The Automatic switch-off
does not work with the
functions: core temperature
sensor, Light, Duration, End,
Time delay.
10.6 Brightness of the display
There are two modes of display
brightness:
• Night brightness - when the appliance
is deactivated, the brightness of the
display is lower between 10 PM and 6
AM.
• Day brightness:
– when the appliance is activated.
– if you touch a sensor field during
the night brightness (apart from
ON / OFF), the display goes back
to the day brightness mode for
the next 10 seconds.
– if the appliance is deactivated and
you set the Minute Minder. When
the Minute Minder function ends,
the display goes back to the night
brightness.
10.7 Cooling fan
When the appliance operates, the
cooling fan activates automatically to
keep the surfaces of the appliance cool.
If you deactivate the appliance, the
ENGLISH
19
Advertisement
Table of Contents
