Page 1
Important! Keep this. Controlled by: Guarantee number: Lillevilla 80 3900 mm x 5650 mm Terrace 1500 mm Wall thickness 45 mm Wall boards 45 mm x 135 mm Dimensions of pedestal 3900 mm x 5650 mm Area of roof 28,7 m²...
Page 2
Unfortunately, without this guarantee number we cannot handle your reclamation! Please NOTE: Luoman Oy reserves all the rights to the photos, drawings, building instructions and other technical information. Using or forwarding them to competitive purposes is forbidden and will be followed by legal responsibility for the consequences.
Page 5
- all the parts are listed here once more, together with their approximate measurements. Important! Please check the content of the packages with the part list and contact your dealer if something is missing or can not be used for the purpose. Lillevilla 80 300109...
Page 6
2b. Slotting the floor-joists for the threaded rods protrude 5-10 mm over the floor- joists. This forms an overhang and prevents waterlogging. Make absolutely certain that there is an adequate ledge on the inside to take the floorboards. See diagram 3 Lillevilla 80 300109...
Page 7
A8/B4 and the last purlin (ridge purlin) be fixed. Note that the ridge purlin and the other 4 purlins are similar in appearance. Please be careful with the gables to prevent the ends from splittering. gable triangle C7/D7 Lillevilla 80 300109...
Page 8
This should be done by adjusting the whole frame using gentle taps of the rubber mallet (please use wooden blocks in between) or by tightening or loosening the hinges. Lillevilla 80 300109...
Page 9
Once the surface has been covered evenly, the floorboards are nailed securely to the floor-joists and the skirting boards fixed all the way round. The skirting board is an attractive way of finishing off the wall/floor junction. Lillevilla 80 300109...
Page 10
A firm, durable anchoring of the roof is important for the stability of the cabin as a whole! Important!After nailing the roof boards they must be covered immediately! Take care when you work! A10/B6 C8/D8 A9/B5 Lillevilla 80 300109...
Page 11
For this reason, a stable, firm foundation - house - roof connection is all-important. To enhance the gale recistance of your summer house, the Lillevilla 80 is equipped with a tension rod system. This is probably the best and most stable solution that can be provided for log cabins.
Page 12
Bolt Washer Metal plate Wall support Wall timber Wall support Metal plate Metal plate Covering boards Washer Nail 45 mm Drill 13 mm 16x57mm 16x57mm 16x57mm Lillevilla 80 300109...
Page 13
Finally, attach the balustrade to the cabin using the 4 T12 connecting planks. The remaining smooth-edged timbers T18/1 and T18/2 are nailed to the foundation beam by way of an optical facing - please ensure that the whole of the base is well ventilated. This is still the best protection against rot. Lillevilla 80 300109...
Page 14
48 x 98 x 500 Floorboards 21 x 95 x 3778 T16/1 Floorboards 21 x 95 x 1780 T16/2 Floorboard 21 x 95 x 3990 Facing plank 21 x 95 x 3210 T18/1 Facing plank 21 x 95 x 2430 T18/2 Lillevilla 80 300109...
Page 15
Regular visual checks help to avoid damage before it occurs. Please remember that fitting adjustments to the different parts are an unavoidable part of the care programme. We wish you a lot of pleasure from your Lillevilla 80. We reserve the right to amend the technical specification.
Page 16
Lillevilla 80 45 mm List of parts Part Dimension in mm. Pieces Mark Control Foundation timber 48 x 98 x 3900 Foundation timber 48 x 98 x 1750 Jointing board 21 x 95 x 400 Floor boards 18 x 87 x 3805...
Need help?
Do you have a question about the Lillevilla 80 and is the answer not in the manual?
Questions and answers