Amcrest IP2M-851EB User Manual page 41

Below is an explanation of fields on the SNMP settings screen:
•
SNMP Version: These checkboxes allow the user to select the SNMP version to use.
SNMP Port: This field allows the user to write in a port for SNMP to use. The port can range from anywhere from 1 to
65535.
•
Read Community: This field shows which SNMP community has read access.
•
Write Community: This field shows which SNMP community has write access.
•
Trap Address: This field allows the user to write in a trap address.
•
Trap Port: This field allows the user to write in a trap port number. The trap port number should not be the same as
the SNMP port.
Note: This feature may not be available on all models.
To reset to default settings, click the Reset Defaults button. To refresh the page, click the Refresh button. To save the
settings, click the Save button.
5.4.2.8. Multicast
Multicast is a feature that enables the camera to broadcast its live view to multiple computers on the same network.
Below is a screenshot of the multicast screen:
Below is an explanation of the fields in the Multicast settings screen:
•
Enable: This checkbox allows the user to enable Multicast functionality.
•
Multicast Address: This field allows the user to enter a multicast address.
41