Download Print this page
Curt Group 51189 Installation Manual

Curt Group 51189 Installation Manual

Brake controller

Advertisement

Quick Links

INSTALLATION MANUAL
Level of Difficulty
Easy
Installation difficulty levels are based on time
and effort involved and may vary depending on
the installer level of expertise, condition of the
vehicle and proper tools and equipment.
Parts List
Qty Description
1
Echo
manual override button
®
1
Reusable adhesive sticker
Tools Required
None
Maintenance
This button uses a CR2032 coin cell battery.
Periodic inspection should be performed
to ensure there is no visible damage.
Product Registration and Warranty
CURT stands behind our products with
industry-leading warranties. To get copies
of the product warranties, register your
purchase or provide feedback, visit:
warranty.curtgroup.com/surveys
CURTMFG.COM
PRODUCT SUPPORT: 877.287.8634
WARNING
This device contains a battery composed of lithium, organic solvents and
other combustible materials. Improper handling of the battery could lead
to distortion, leakage, overheating, explosion or fire, causing personal injury.
Never swallow, charge, heat, expose to open flames, moisture or liquid.
Never attempt to disassemble, reverse the polarity or short circuit.
Product Photo
CAUTION
When disposing of used batteries, remove the batteries in advance. If not possible,
dispose entire product in a waste bin specific for electronics, as per the WEEE directive.
Follow any national or local regulations for battery disposal that apply to your area.
This button is not a toy. It contains small parts and accessories
that present a choking hazard. Keep away from children or pets.
Do not attempt to service this product.
NOTICE
Before you begin installation, read all instructions thoroughly.
All steps must be followed to ensure the product will function properly. Once installed,
test for proper function by using a test light or connecting a properly wired trailer.
Battery life will be shortened with heavy usage and / or use in extreme conditions.
Do not use product in temperatures below -4°F (-20°C) or above 129.2°F (54°C).
This button is rated as splash-proof only. Do not submerge or attempt to use under water
as this will result in irreversible damage that is outside our warranty coverage.
Clean with a damp cloth and do not use chemical or abrasive cleaning products.
51189-INS-RA
01/13/2021
Echo
Mobile Brake Controller (not included)
®
PAGE 1
51189

Advertisement

loading
Need help?

Need help?

Do you have a question about the 51189 and is the answer not in the manual?

Questions and answers

Summary of Contents for Curt Group 51189

  • Page 1 INSTALLATION MANUAL 51189 Level of Difficulty WARNING Easy This device contains a battery composed of lithium, organic solvents and other combustible materials. Improper handling of the battery could lead Installation difficulty levels are based on time to distortion, leakage, overheating, explosion or fire, causing personal injury.
  • Page 2 While the app is scanning, press and hold the manual override button to pair. If at any point, you want to stop the scan, press the 'Stop Scan' button. CURTMFG.COM • PRODUCT SUPPORT: 877.287.8634 • 51189-INS-RA • 01/13/2021 • PAGE 2...
  • Page 3 As you press the override button, the brake activation ring will show stopping power being applied to the brakes. The notification 'Brakes Being Applied' will appear in the center of the ring. CURTMFG.COM • PRODUCT SUPPORT: 877.287.8634 • 51189-INS-RA • 01/13/2021 • PAGE 3...
  • Page 4 To edit the nickname of the button, select the 'Edit Nickname'. Type in the desired name for your override button and select 'OK' to finalize. CURTMFG.COM • PRODUCT SUPPORT: 877.287.8634 • 51189-INS-RA • 01/13/2021 • PAGE 4...
  • Page 5 Let the adhesive air-dry and it will return to its initial state and be ready to adhere again. CURTMFG.COM • PRODUCT SUPPORT: 877.287.8634 • 51189-INS-RA • 01/13/2021 • PAGE 5...

This manual is also suitable for:

612314050666