Download Print this page
Curt Group 11392 Installation Instructions Manual

Curt Group 11392 Installation Instructions Manual

For kia forte koup 2014-

Advertisement

Quick Links

YEARS: 2014-CURRENT
MAKE:
WARNING: NEVER EXCEED YOUR VEHICLE MANUFACTURER'S RECOMMENDED TOWING CAPACITY
WEIGHT CARRYING:
PRO INSTALL TIME:
NOVICE INSTALL TIME:
IF YOU ARE HESITANT TO UNDERTAKE
THIS TASK ON YOUR OWN, CONTACT AN AUTHORIZED
CURT INSTALLER FOR ADDITIONAL ASSISTANCE.
INSTALLATION REQUIRES:
TORQUE
WRENCH
RATCHET
WIRE PIPE
PRY BAR
BRUSH
PERIODICALLY CHECK THIS RECEIVER HITCH TO ENSURE ALL FASTENERS ARE TIGHT AND ALL STRUCTURAL COMPONENTS ARE SOUND
CURT Manufacturing LLC. warrants this product to be free of defects in material and/or workmanship at the time of retail purchase by the original purchaser. If the product is found to be defective,
SCAN FOR
CURT Manufacturing LLC. may repair or replace the product at their option, when the product is returned, prepaid, with proof of purchase. Alteration to, misuse of, or improper installation of this product
MORE INFO
voids the warranty. CURT Manufacturing LLC.'s liability is limited to repair or replacement of products found to be defective, and specifically excludes liability for incidental or consequential loss or damage.
For more information log onto www.curtmfg.com, & for helpful towing tips log onto www.hitchinfo.com
11392
INSTALLATION INSTRUCTIONS
KIA
TRAILER WEIGHT:
2,000
LBS.
TONGUE WEIGHT:
200
LBS.
20
MIN.
INSTALLATION TIPS:
40 MIN.
1. BEFORE YOU BEGIN INSTALLATION, READ ALL
INSTRUCTIONS THOROUGHLY.
2. TO EASE INSTALLATION, 2 PEOPLE MAY BE
REQUIRED.
3. USING PROPER TOOLS WILL GREATLY IMPROVE
THE QUALITY OF THE INSTALL AND REDUCE THE
TIME REQUIRED.
4. NEED HELP OR HAVE SOME QUESTIONS?
CALL TECHNICAL SUPPORT AT 800.798.0813
17mm
LEVEL OF DIFFICULTY:
EASY
SOCKET
SAFETY
GLASSES
MODEL: FORTE
WARNING:
WE RECOMMEND THE USE OF 18050 STABILIZING STRAPS FOR ALL NON-TRAILER
(WHEEL-LESS) LOADS. PLEASE SEE THE CURT CATALOG OR VISIT US ONLINE AT
WWW.CURTMFG.COM FOR FURTHER INFORMATION.
MODERATE
MODERATE
CHALLENGING
- NO DRILLING REQUIRED
- LOWER EXHAUST
TO EASE INSTALL
Safety glasses should be
worn at all times while
installing this product .
STYLE:
VEHICLE PHOTO:
REPRESENTATIVE PHOTO
HITCH ILLUSTRATION:
MAKE SURE YOUR HITCH MATCHES
KOUP
3/5/2014

Advertisement

loading
Need help?

Need help?

Do you have a question about the 11392 and is the answer not in the manual?

Questions and answers

Summary of Contents for Curt Group 11392

  • Page 1 Safety glasses should be 11392 INSTALLATION INSTRUCTIONS worn at all times while installing this product . YEARS: 2014-CURRENT MAKE: MODEL: FORTE STYLE: KOUP WARNING: NEVER EXCEED YOUR VEHICLE MANUFACTURER'S RECOMMENDED TOWING CAPACITY WARNING: WEIGHT CARRYING: TRAILER WEIGHT: 2,000 LBS. WE RECOMMEND THE USE OF 18050 STABILIZING STRAPS FOR ALL NON-TRAILER (WHEEL-LESS) LOADS.
  • Page 2: Installation Walkthrough

    INSTALLATION WALKTHROUGH: 1. To ease installation, lower exhaust by removing (2) rubber Parts List isolators from exhaust. ITEM PART NUMBER DESCRIPTION 3/8" CONICAL TOOTHED WASHER M10 - 1.25 x 25 HEX BOLT EXISTING WELDNUTS PASSENGER SIDE (BOTH SIDES) FRAME RAIL MUFFLER DRIVER SIDE 2.
  • Page 3 INSTALLATION WALKTHROUGH: 3. Loosely secure hitch with M10-1.25 x 25mm hex bolts and 5. Raise exhaust back into position if lowered. 3/8" conical toothed washers through existing weldnuts in outside of frame rails. 4. Torque 10mm hardware to 48 ft-lbs. Installation complete For more information log onto www.curtmfg.com, &...
  • Page 5 11392 KIA FORTE KOUP 3/5/2014 PAGE 1 of 2 GROSS LOAD CAPACITY WHEN USED AS A WEIGHT CARRYING HITCH: 2,000 LBS. TRAILER WEIGHT & LBS. TONGUE WEIGHT. ***DO NOT EXCEED VEHICLE MANUFACTURER'S RECOMMENDED TOWING CAPACITY.*** WARNING: ALL NON-TRAILER LOADS APPLIED TO THIS PRODUCT MUST BE SUPPORTED BY 18050 STABILIZING STRAPS.
  • Page 6: Installation Steps

    11392 KIA FORTE KOUP PAGE 2 of 2 1-800-798-0813 HAVING INSTALLATION QUESTIONS? CALL TECHNICAL SUPPORT AT TOOLS REQUIRED RATCHET TORQUE WRENCH 17mm SOCKET WIRE PIPE BRUSH PRY BAR SAFETY GLASSES FRAME RAIL FASCIA HITCH INSTALLED HITCH POSITION INSTALLATION STEPS 1. To ease installation, lower exhaust by removing (2) rubber isolators from exhaust.