Table of Contents
Advertisement
It will restore the default configuration settings in the Configure
Monitors menu, and delete any customized settings. In this case,
Spark IGN Required Monitors and Compression IGN Required
Monitors will include all the available monitors, and the Allowed
INC Monitors will be set to 1.
The tool will display an information message to ask for your
confirmation. Select Yes to proceed and No to exit without change.
Unit of Measure
Metric is the default measurement unit.
1)
From System Setup screen, use the UP/DOWN scroll button to
select Unit of Measure and press the OK button.
2)
From Unit of Measure screen, use the UP/DOWN scroll button
to select the desired unit of measurement. (Figure 3.6 )
3)
Press the OK button to save your selection and return to previous
menu.
Key Beep Set
This function allows you to turn on/off the build-in speaker for key
pressing.
The default setting is Beep On.
Unit of Measure
English
Metric
Figure 3.6
21
1/2
?
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the Autolink AL539B and is the answer not in the manual?
Questions and answers