Shutdown And Startup Problems - Fujitsu Lifebook T2020 User Manual

Problem
The batteries seem to
discharge too quickly.
(continued)

Shutdown and Startup Problems

The Suspend/Resume
button does not work.
The system powers up, and
displays power on informa-
tion, but fails to load the
operating system.
Possible Cause Possible Solutions
You are running an Use both the primary battery and an optional second battery
application that uses a and/or use a power adapter for this application when at all
lot of power due to fre- possible.
quent hard drive access
or optical drive access,
or use of a modem,
LAN PC card, Wireless
LAN, or Bluetooth
device.
The batteries are old. Replace the batteries.
The batteries have been Replace the batteries.
exposed to high temper-
atures.
The batteries are too Restore the notebook to normal operating temperature. Charging
hot or too cold. icon on the Status Indicator panel will flash when battery is out-
side of operating range.
Suspend/Resume In the Control Panel under Power Options, select the "Choose
button is disabled. what the power button does" option and make your choices.
There may be applica- Close all applications and try the button again.
tion software. conflict
The boot sequence set- Set the operating source by pressing the [ESC] key while the
tings of the setup utility Fujitsu logo is on screen or use the [F2] key and enter the setup
are not compatible with utility and adjust the source settings from the Boot menu. See
your configuration. "BIOS Setup Utility" on page 66.
You have a secured Make sure you have the right password. Enter the setup utility and
system requiring a verify the Security settings and modify them as accordingly. See
password to load your "BIOS Setup Utility" on page 66.
operating system.
105 - Troubleshooting Your LifeBook