Shutdown And Startup Problems - Fujitsu LIFEBOOK P701 User Manual

Hide thumbs Also See for LIFEBOOK P701:
Table of Contents

Advertisement

Available languages

Available languages

Problem
Your notebook will not
work on battery alone.
(continued)
The battery seems to 
discharge too quickly.

Shutdown and Startup Problems

The Suspend/Resume 
button does not work.
The system powers up,
and displays power on
information, but fails to
load the operating system.
Possible Cause
Your installed battery is faulty.
You are running an applica-
tion that uses a lot of power
due to frequent hard drive or
optical drive access, or use of
a Wireless device.
The power savings features
may be disabled.
The brightness is turned all
the way up.
The battery is very old.
Battery has been exposed to
high temperatures.
The battery is too hot or too
cold.
There may be application
software conflict.
The boot sequence settings
of the setup utility are not
compatible with your configu-
ration.
You have a secured system
requiring a password to load
your operating system.
88 - Troubleshooting
Possible Solutions
Verify the condition of the battery using the Status Indicator
panel and replace or remove any batteries that are shorted.
See "Status Indicator Panel" on page 26.
Use a power adapter for this application when at all possible.
Check the Power Options menu settings and adjust accord-
ing to your operating needs.
Turn down the brightness adjustment. The higher the bright-
ness the more power your display uses.
Replace the battery.
Replace the battery.
Restore the notebook to normal operating temperature.
Charging icon on the Status Indicator panel will flash when
battery is outside of operating range.
Close all applications and try the button again.
Set the operating source by pressing the [ESC] key while the
Fujitsu logo is on screen or use the [F2] key and enter the
setup utility and adjust the source settings from the Boot
menu.
See "BIOS Setup Utility" on page 49.
Make sure you have the right password. Enter the setup util-
ity and verify the Security settings and modify them as
See "BIOS Setup Utility" on page 49.
accordingly.

Hide quick links:

Advertisement

Chapters

Table of Contents
loading

Table of Contents