Precautions - Fujitsu Lifebook T2020 User Manual

From Standby/Hibernation State
1
Press your Suspend/Resume button.
2
When the Security Indicator flashes, enter the password and press Enter button.The notebook should resume
normal operation.
Incorrect Password Entry
If an invalid supervisor or user password is entered three times in succession, the system will "beep" for
about one minute. If a valid password is entered within a minute (while system beeps), the beeping will
stop and the notebook will resume normal operation. If no password is entered or an invalid password is
entered while the system beeps, the system will return to its previous locked state (standby or off) and the
Security Indicator will go off. To reactivate the notebook after a password failure, you must press the
Suspend/Resume button, then enter a correct password
R
EMEMBER THE USER PASSWORD YOU SPECIFIED ON THE
FORGET THE PASSWORD YOU WILL NOT BE ABLE TO USE YOUR COMPUTER
PASSWORD CAN OVERRIDE THE USER PASSWORD

Precautions

Opening and Closing the Cover
By default, closing the cover automatically places your system into Standby mode.
Windows XP systems:
You can change the action the system takes when the cover is closed by opening the Power Options
Properties icon in the Control Panel, and selecting the Advanced tab. Make a choice from the drop down
menu for When I close the lid of my portable computer and click the [OK] button.) Opening the cover
does not automatically place the notebook into normal operation. Instead, you must enter the proper
security password after pushing the Suspend/Resume button.
58 - LifeBook Security/Tablet PC Buttons
.
S P
ECURITY ANEL
.
A . I
PPLICATION F YOU
. T
HE SUPERVISOR