Shutdown And Startup Problems - Fujitsu LifeBook P3010 User Manual

Problem Possible Cause
The battery seems to The brightness is turned all
discharge too quickly. the way up.
Battery has been exposed to
high temperatures.
The battery is too hot or too
cold.

Shutdown and Startup Problems

The Suspend/Resume Suspend/Resume button is
button does not work. disabled.
There may be application
software conflict.
The system powers up, The boot sequence settings
and displays power on of the setup utility are not
information, but fails to compatible with your configu-
load the operating system. ration.
You have a secured system
requiring a password to load
your operating system.
An error message is Power On Self Test (POST)
displayed on the screen has detected a problem.
during the boot sequence.
Your notebook appears to BIOS setup changes were not
change setup parameters saved when made and you
when you start it. exited the setup utility.
Possible Solutions
Turn down the brightness adjustment. The higher the bright-
ness the more power your display uses.
Replace the battery.
Restore the notebook to normal operating temperature.
Charging icon on the Status Indicator panel will flash when
battery is outside of operating range.
Enable the button by going to the Control Panel > Power
Options Properties and clicking on the Advanced tab. In the
Power buttons area, select the option that suits your needs.
Close all applications and try the button again.
Set the operating source by pressing the [ESC] key while the
Fujitsu logo is on screen or use the [F2] key and enter the
setup utility and adjust the source settings from the Boot
menu. See "BIOS Setup Utility" on page 44.
Make sure you have the right password. Enter the setup util-
ity and verify the Security settings and modify them as
accordingly. See "BIOS Setup Utility" on page 44.
See the Power On Self Test (POST) messages to determine
the meaning and severity of the problem. Not all messages
are errors; some are simply status indicators. See "Power On
Self Test Messages" on page 77.
Make sure you select Save Changes And Exit when exiting
the BIOS setup utility.
74 - Troubleshooting Your Notebook