Fujitsu Lifebook T2020 User Manual page 46

To run the calibration utility:
1
Go to Start -> Control Panel. If you are not in Classic View, select "Switch to Classic View" in the left panel.
Windows XP Tablet PC Edition: Double-click the Tablet and Pen Settings icon and select the Settings tab.
Windows Vista: Double-click the Tablet PC Settings icon and select the General tab
2
Click the [Calibrate] button.
3
Adjust the display of your notebook to a comfortable angle and find the (+) symbol in the upper-left corner of
the display.
D
O NOT USE EXCESSIVE FORCE WHEN TAPPING ON THE SCREEN DURING CALIBRATION
EXCESSIVE FORCE COULD RESULT IN DAMAGE TO THE
4
Using the stylus, firmly touch the screen directly on the (+) symbol. Lift the stylus from the screen and the target
will move to a different location on the screen.
5
Repeat step 4 until you have selected all of the (+) symbols.
6
Once you have selected all the symbols, press the [OK] button.
7
Touch the stylus to various points on the screen to verify that the screen is correctly calibrated. If you are not
satisfied with the screen's calibration, press the [Calibrate]) button to begin again.
46 - Quick Point Pointing Device/Touch Screen
LCD /
AND OR TOUCH PANEL
. U
SE OF
.