Progress PHN 1220 User Manual page 7

Control knobs for hob
The selector knobs for the four hob
heating elements are located on the switch
panel. The hotplates are controlled by a 9-
position switch, from which the following
working levels can be used:
0 = OFF
1 = Minimum
9 = Maximum
Dual-circuit switching
(see the list of appliances in the
«Technical Data» chapter)
Switch on both hot rings by turning the
cooking zone knobs from level 9 to "
position (clockwise); There is an audible
"click". Both heating circuits are now
switched on simultaneously. You can then
set the level you want (turn the knob anti-
clockwise).
Never leave the appliance unsupervised
when preparing food with oil or fat, like
chips, for example, as oil and fat can easily
catch fire if overheated.
Safety Thermostat
To avoid dangerous overheating (through
improper use of the appliance or defective
components) the oven is fitted with a safety
thermostat which breaks the electricity
supply. The oven switches back on again
automatically, when the temperature drops.
Should the safety thermostat react as a
result of improper use of the appliance, just
eliminate the cause of the defect once the
oven is cooled. If the thermostat reacts
because of a defective component, please
contact customer services.
Cooling fan
The oven is equipped with a cooling fan,
which cools the control panel, the operating
knobs and the oven door handle. The cooling
fan is activated automatically when the oven
is in use. The warm air is blown through the
opening next to the oven door handle. The
cooling fan shuts down when the oven
function switch is in the "
0
" position.
"
progress 7