Progress PHN 1220 User Manual page 16

16 progress
Grill heating element
This model has been fitted with a hinged
grill element to enable you to clean the roof
of the oven easily.
Before proceeding ensure the
oven is cool and is disconnected
from the electricity supply.
1. Undo the screw fastening the grill ele-
ment (see Fig.). When carrying out this
operation for the first time, we recom-
mend using a screwdriver.
2. Then pull the grill element down care-
fully until you can access the oven cover
(see Fig.).
3 . Clean the oven cover with a suitable
cleaner and wipe dry before replacing
the hinged grill element.
4. Gently push up the grill element into
place and tightly screw the holding nut.
Ensure the retaining nut on the
grill element
tightened so that it does not fall
down when in use.
Oven shelf support rails
The shelf support rails on the left and right
hand sides of the oven can be removed for
cleaning the side walls.
Removing the shelf support rails
First pull the front of the rail away from the
oven wall and then unhitch at the back (1, 2).
Fitting the shelf support rails
To install, first reattach the rails at the back,
then put them into position at the front and
press them into place (3).
To clean the shelf support rails, soak in warm
soapy water and remove stubborn marks
with a well wetted soap impregnated pad.
Rinse well and dry with a soft cloth.
is properly
1
2
3