Front-Side Lamp - Fujitsu M4099D Reference Manual

Front-Side Lamp

Open the upper transport unit.
Remove the connector of the
front-side lamp unit.
Pull out the front-side lamp unit
toward the right.
Lamp
2-14
WARNING
Wait at least 3 minutes after turning off the power before cleaning.
ACHTUNG
Warten Sie nach dem Reinigen mindestens 3 Minuten bevor Sie den
Scanner wieder anschalten.
Front-side Lamp unit (inside)
Rotate the lamp a half turn so that
the two terminals on each end
align with the slot on the lamp
socket and remove the lamp from
the front-side lamp unit.